This hub is known as a "short hub", measuring just 3 1/2" front to back has a 5 on 4 1/2" bolt circle for a 2,000lb axle with a 1,250lb capacity per hub. Includes pressed in bearing races with a pi...
Replacement cable and pin for new style Hopkins (2-3/16 inches long) standard break away switches 20005, 20010, 20014. Also used on Hopkins LED break-away switches 20050, 20059, 20060.
For use wit...
Easily build your own axle with this 2,200 lb. rated assembly. This kit includes (2) - 5-bolt on 4-1/2 inch bolt center hubs for 2,200 lb. axles, (2) - 1-1/16 inch straight spindles, (2...
Hub has 4-bolt pattern on 4" circle for a 2,000lb axle with hub capacity of 1,250lbs. Includes pressed in bearing races with a pilot diameter 2.5", flange diameter 5.56" and measures 4-1/4" tall.
...
<p>The hub boasts a 4-bolt pattern on a 4" circle, designed for a 2,000lb axle, and has a substantial hub capacity of 1,250lbs. It includes pressed-in bearing races with a pilot diameter of 2...
The Fastway® Zip™ 48 inch breakaway cable and switch system is designed not to drag. The coiled design keeps the cable up off the ground and out of harms way while you are towing. The zip cable e...
Hub has 5 on 4-1/2" circle for a 1-3/8" To 1-1/16" tapered spindles for a 3,500lb axle with a hub capacity of 1,750lbs. Includes pressed in bearing races with a pilot diameter 2.59", flange diamete...
The Fastway® Zip™ 72 inch breakaway cable and switch system is designed not to drag. The coiled design keeps the cable up off the ground and out of harms way while you are towing. The zip cable e...
Easily build your own axle with this 2,000 lb. rated assembly. This kit includes (2) - 4-bolt on 4 inch bolt center hubs for 2,000 lb. axles, (2) - 1 inch straight spindles, (2) castle nuts, (2) co...
Easily build your own axle with this 6,000 lb rated* hub assembly (*rating as a pair). This kit includes (2) - 8-Bolt on 6-1/2 inch bolt center hubs for 6,000 lb axles, (2) - 1-3/4" to 1-1/4" taper...
Designed to quickly connect all current Tekonsha, Draw-Tite, Reese and Pro Series Brake Controllers to OEM wiring.
Two-plug brake control harness
Quick, easy installation of Tekonsha, Draw-Tite, Re...
Designed to quickly connect all current Tekonsha, Draw-Tite, Reese and Pro Series Brake Controllers to OEM wiring.
Two-plug brake control harness
Quick, easy installation of Tekonsha, Draw-Tite, Re...
Designed to quickly connect brake controls that do not come with a mating connector, to a vehicle's OEM wiring.
Single-plug brake control harness
Connects brake controls without mating connector to...
Designed to quickly connect all current Tekonsha, Draw-Tite, Reese and Pro Series Brake Controllers to OEM wiring.
Two-plug brake control harness
Quick, easy installation of Tekonsha, Draw-Tite, Re...
Designed to quickly connect all current Tekonsha, Draw-Tite, Reese and Pro Series Brake Controllers to OEM wiring.
Two-plug brake control harness
Quick, easy installation of Tekonsha, Draw-Tite, Re...
The interface of the Spectrum is a single rotary knob with a push-button in the center that allows the driver to adjust brake power output. It is equipped with ten tri-color LEDs (red, blue and gre...
Designed to quickly connect to Hayes and Curt Brake Controllers to hardwire into vehicle brake control wiring under the dash.
Hardwire into the vehicle wiring is requires
Quick, easy installation ...
Designed to quickly connect Hayes and Curt Brake Controllers to OEM wiring.
Two-plug brake control harness
Quick, easy installation of Hayes or Curt Brake Controllers to vehicles equipped with mati...
Designed to quickly connect Hayes and Curt Brake Controllers to OEM wiring.
Two-plug brake control harness
Quick, easy installation of Hayes or Curt Brake Controllers to vehicles equipped with mati...
Designed to quickly connect Hayes and Curt Brake Controllers to OEM wiring.
Two-plug brake control harness
Quick, easy installation of Hayes or Curt Brake Controllers to vehicles equipped with mat...
The Pod (Power on Demand) trailer brake control is your best choice, especially when your installation options are limited.
Fits: 2 and 4 Brake Trailers
The Pod can be mounted in any directi...
Designed to quickly connect Hayes and Curt Brake Controllers to OEM wiring.
Two-plug brake control harness
Quick, easy installation of Hayes or Curt Brake Controllers to vehicles equipped with mati...
