Replacement brake shoes for Dexter 12 inch x 2 inch hydraulic trailer brakes. Kit includes 2 shoes (one side) for left or right application, 2 hold down pins (049-012-00) and 2 hold down springs (...
Self-adjusting backing plate eliminates the need for periodic maintenance of brake adjusters. The fine-tooth adjuster mechanism keeps the brake shoes at the optimum position as normal wear occurs....
Self-adjusting backing plate eliminates the need for periodic maintenance of brake adjusters. The fine-tooth adjuster mechanism keeps the brake shoes at the optimum position as normal wear occurs. ...
Orifice is used on Dexter DX8.0, DX12.5 and DX20EX (formerly Dico / Titan model 6, 10 and 20) drum brake actuators and has 1/8 inch NPT male thread on one side and a female 3/8 inch 24 UNF thread w...
Self-adjusting backing plate eliminates the need for periodic maintenance of brake adjusters. The fine-tooth adjuster mechanism keeps the brake shoes at the optimum position as normal wear occurs. ...
This hub/drum assembly contains everything you need to replace your hub/drums & brakes on your trailer. This assembly works for a spindle that has a 1-3/8" inner bearing surface to a 1-1/16" be...
All plumbing parts necessary for connecting a surge brake actuator to hydraulic brakes.Kit includes: (1) 20 foot line, (2) 6.3 foot lines, (4) 24 inch lines, (1) 38 inch line (4) union T- connector...
12 inch x 2 inch uni-servo hydraulic brake assemblies fit 5,200 lb. axles with 5-bolt pattern. Dexter numbers K23-324-00 and K23-325-00.
Rated 5,200 lbs. capacity per pair
5-bolt mounting pattern
...
Kit includes (2) 24 inch lines, (1) 6.3 foot line, (1) 38 inch line, (4) cable ties, (2) Union T-connectors, (2) T-clamps, (8) self-taping screws and (2) cable clamps.
Designed to be used on trail...
<p>This hub/drum assembly contains everything you need to replace your hub/drum & brake on the passenger side of your trailer. This assembly works for a spindle that has a 1-3/4" inner be...
This hub/drum assembly contains everything you need to replace your hub/drum & brake on the drivers side of your trailer. This assembly works for a spindle that has a 1-3/8" inner bearing surfa...
10" Hub and Drum has 5 on 5" bolt circle for a 1-3/8" To 1-1/16" tapered spindle for 3,500lb axle with a hub capacity of 1,750lbs. Includes pressed in bearing races. 1/2"-20 lugs.
2" deep inside f...
10" Hub and Drum has 5 on 4-1/2" bolt circle for a 1-3/8" To 1-1/16" tapered spindle for 3,500lb axle with a hub capacity of 1,750lbs. Includes pressed in bearing races. 1/2"-20 lugs.
2" deep insi...
Complete Assembly with Bearings, Seal, Dust Cap, Cotter Pin and Lug Nuts.
7" Hub and Drum has 5 on 4-1/2" bolt circle for a 2,000lb axle with a hub capacity of 1,250lbs. Includes pressed in bearin...
Complete Assembly with Bearings, Seal, Dust Cap, Cotter Pin and Lug Nuts.
7" Hub and Drum has 5 on 4-1/2" bolt circle for a 2,000lb axle with a hub capacity of 1,250lbs. Includes pressed in bearin...
7" hub and drum has 4 on 4" bolt circle for a 2,000lb axle with hub capacity of 1,250lbs. Includes pressed in bearing races with a pilot diameter 2.5", flange diameter 5.56" and measures 4-1/4" tal...
7" Hub and Drum has 5 on 4-1/2" bolt circle for a 2,000lb axle with a hub capacity of 1,250lbs. Includes pressed in bearing races with a pilot diameter 2.5", flange diameter 5.56" and is 4-1/4" tal...
7" Hub and Drum has 5 on 4-1/2" bolt circle for a 2,000lb axle with a hub capacity of 1,250lbs. Includes pressed in bearing races with a pilot diameter 2.5", flange diameter 5.56" and is 4-1/4" tal...
<p>10" Hub and Drum has 6-bolt pattern on 5-1/2" circle for a 1-3/8" To 1-1/16" tapered spindles for a 3,500lb axle with a hub capacity of 1,750lbs. Includes pressed in bearing races.&nbs...
7" Hub and Drum has 4 on 4" bolt circle for a 2,000lb axle with hub capacity of 1,250lbs. Includes pressed in bearing races with a pilot diameter 2.5", flange diameter 5.56" and measures 4-1/4" tal...
