Black plastic battery box for trailer breakaway system holds standard 5 amp battery. Inside measurements are: 6" long x 3" wide x 5¾" tall. Box lid includes plastic tab for padlock (sold separately).
Replacement filler cap and gasket used on Dexter DX12.5 and DX20EX (formerly Titan model 10 and 20) surge brake actuators. Threaded area is 1-9/16 inch diameter. Titan part number: 4830600.Used o...
Triangular leaf spring equalizer bar works with 1-3/4 inch wide double eye or slipper style leaf springs. Equalizer is made of ductile iron and manufactured to industry standards. Black painted f...
<p>Trailer Leaf Springs come in a variety of lengths, widths, capacities and styles. <strong>Free Length</strong> is the distance from the center of each mounting hole on a double...
Trailer Leaf Springs come in a variety of lengths, widths, capacities and styles. Free Length is the distance from the center of each mounting hole on a double eye spring, or from the mounting hole...
Trailer Leaf Springs come in a variety of lengths, widths, capacities and styles. Free Length is the distance from the center of each mounting hole on a double eye spring, or from the mounting hole...
Kit Includes - (4) U-Bolts, (2) Tie Plates (2) Spring (SS-300) seats and (8) Nylon Lock Nuts. U-Bolt Measurements - 7 Inch Length, 3.09 Inch Inside Width, 1/2-20 Thread. Tie Plate Measurements - 5....
Trailer Leaf Springs come in a variety of lengths, widths, capacities and styles. Free Length is the distance from the center of each mounting hole on a double eye spring, or from the mounting hole...
10-Pack of spring bolts for mounting double eye or slipper style axle springs to hanger brackets or equalizers. 9/16" x 3". Knurled shoulder prevents bolt from spinning in hanger bracket.
Spring shackle links are used for attaching the rear of double eye springs to hanger brackets on single axle trailers. Link has 9/16 inch holes with 2 inch hole centers. 10-Pack.
10-Pack
Spring shackle links are used for attaching the rear of double eye springs to hanger brackets on single axle trailers. Link has 9/16" holes with 2.56" hole centers.
Overall lingth 3.81"
<div>Coupler Latch Kit Assembly fits Dexter DX6.6, DX7.5 and DX8.5 surge brake actuators with serial number 17927 and above. Formerly Tie Down Engineering models 660E, 750E and 850E...
Fits Dexter 12-1/4 inch x 3-3/8 inch (9-10K), 12-1/4 inch x 4 inch (10K) and 12-1/4 inch x 5 inch (12-15K) electric brakes built after 6/92. Red and black wires. Includes spring and retaining clip....
Replacement grease cap for Dexter E-Z Lube axles. Dexter number 021-043-02. Part is not manufactured by Dexter.
Used on Dexter E-Z Lube axles
Zinc plated
22 gauge material
10 inch x 2-1/4 inch electric brake assembly fits 3,500 lb. axles with 4-bolt pattern on 2-7/8 inch center. Includes mounting studs. Dexter part number: K23-027-00
Rated 3,500 lbs. capacity per pa...
This Trailer Bearing Repair Kit includes everything you need to replace the wheel bearings on one trailer hub. This kit is for axles with a 1" straight spindle and includes 2 bearings, 2 bearing ra...
Hub has 4 on 4" bolt circle for a 2,000lb axle with hub capacity of 1,250lbs. Includes pressed in bearing races with a pilot diameter 2.5", flange diameter 5.56" and measures 4-1/4" tall.
Not Incl...
A proven track record of performance and reliability, designed to be hard wired into your trailer's electrical system. All components self-contained under the BrakeRite cover. BrakeRite has been a ...
