{"title":"Jacks Leveling \u0026 Chocks - RV","description":"\u003ch1 dir=\"ltr\"\u003e\u003cspan\u003eJacks, Leveling \u0026amp; Chocks\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGetting a travel trailer or utility trailer set up at camp comes down to three things done in the right order: level the trailer on the wheels first, chock the wheels before you disconnect, then drop the stabilizer jacks once everything is level. Skip a step or mix up the sequence and you're either dealing with a rig that rocks every time someone climbs in, or worse - a trailer that shifts off leveling blocks after the tow vehicle pulls away.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis collection covers every piece of hardware in that process: tongue jacks for lifting and hitching, stabilizer jacks for corner support, wheel chocks from simple rubber wedges to leveling-chock combos, electric jacks for both tongue and stabilizer applications, jack support pads, and specialty hardware including heavy-duty hydraulic power units and the Fastway Flip folding jack foot. Brands include Ram, Bulldog, Wallace Forge, Stillwell, Fastway, Camco, Husky, Valterra, and Caliber - sourced through Rigid Hitch.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eThe One Rule That Protects Your Trailer Frame\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBefore getting into specific products, there's a distinction that every trailer owner needs to have right: stabilizer jacks are not leveling jacks, and using them as such can bend the trailer frame.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTongue jacks and leveling\u003c\/span\u003e\u003cspan\u003e - Your trailer gets leveled at the wheels (side-to-side with blocks or leveling ramps) and at the tongue (front-to-back via the tongue jack or landing gear). The trailer's frame is engineered to handle load at the wheel\/axle points and at the tongue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStabilizer jacks\u003c\/span\u003e\u003cspan\u003e - Corner stabilizers are deployed after the trailer is already level, to minimize rocking and movement caused by people walking around inside. They make contact with the ground to take out the bounce - they do not lift the trailer, and they are not rated to support its full weight.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTrying to level a trailer by cranking corner stabilizers up into the frame bypasses the suspension and puts stress on frame rails that aren't designed to take it at that point. Level first. Chock. Then stabilize.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTongue Jacks\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe tongue jack mounts to the front A-frame of the trailer and does the real work: lifting the coupler high enough to connect to the tow ball, and supporting the tongue weight of the trailer when it's parked. Most tongue jacks on travel trailers are A-frame mounted with a fixed bracket; some applications use swivel-mount or weld-on designs for boat trailers, utility trailers, and custom builds.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eManual A-Frame Tongue Jacks\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Ram A-Frame Top Wind Jack at 2,000 lb lift capacity is the standard direct-replacement option for most mid-size travel trailers and utility trailers. Top-wind means the crank handle is at the top of the jack body - the more common configuration on A-frame trailers because it keeps the handle accessible above the tongue frame.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor heavier applications, this collection carries Ram A-Frame jacks in a 3,000 lb lift \/ 5,000 lb support capacity range in two configurations: one with a wheel (useful on packed gravel or asphalt where rolling the jack during adjustment is easier), and one with a foot and mounting hardware for permanent installations. The taller version of the 3,000 lb lift A-frame jack adds extra travel for trailers with a higher tongue height.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 5,000 lb capacity A-frame jack with 15-inch travel covers heavier trailers that need more range of motion, such as larger bumper-pull travel trailers and toy haulers with high tongue weights.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe RAM A-Frame Trailer Jack with bracket (2,000 lb capacity) is the budget-entry replacement option - priced for straightforward swaps on utility and light cargo trailers.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSide-Mount and Swivel-Mount Jacks\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Pro Series Utility Trailer Jack (1,000 lb lift, side-wind, bolt-on, 10-inch travel) is a side-mount jack suited for lighter utility, landscape, and cargo trailer applications where an A-frame mount isn't the right configuration. Side-wind means the crank operates from the side rather than the top - common on smaller trailer tongues where clearance at the top is limited.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor marine trailers specifically, the Ram Marine Bolt-On Swivel Jack (1,000 lb capacity) is built for boat trailer applications. The swivel design allows the jack to rotate out of the way when not in use, keeping it clear of the road during towing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo weld-on swivel bracket jacks from Ram (2,000 lb capacity, top-wind) are available for fabricators and shops building custom trailers or replacing jacks on frames without existing mounting plates. One uses a swivel bracket mount; the other is a direct weld-on bracket design.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHeavy-Duty Jacks\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Ram Square Tube Drop Leg Jack (7,000 lb capacity, top-wind, weld-on) and the Wallace Forge Heavy-Duty Square Mount Jack (12,000 lb, side-wind, side-pull) are the workhorses of this collection - built for heavy equipment trailers, livestock haulers, and commercial applications where standard trailer jacks aren't rated high enough.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Ram Heavy-Duty Single-Speed Companion Square Tube Jack (full capacity listed on-page) covers companion or rear-position jack applications on multi-jack setups for gooseneck and larger bumper-pull trailers.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eElectric Tongue Jacks\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo 3,500 lb electric tongue jacks are available in this collection, priced at two different price points. Electric tongue jacks replace the crank with a motor-driven mechanism operated by a button or switch - useful for frequent travelers who set up and break down camp regularly, for anyone with physical limitations that make cranking difficult, or simply for shaving time off the setup routine.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Bulldog Electric Trailer Tongue Jack (top of the collection by capacity) is the premium option here - Bulldog is a long-established tongue jack brand owned by Cequent\/TriMas, known for durability on demanding towing applications. Electric tongue jacks draw power from the trailer's 12V battery, so a healthy battery is part of the equation. Confirm that your trailer's battery is in good shape before relying on an electric jack at a remote campsite.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eStabilizer Jacks\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStabilizer jacks deploy at the corners (and sometimes mid-frame) of the trailer after it's level to take out the bounce and sway that comes from movement inside. They're the difference between a rig that feels solid underfoot and one that rocks noticeably every time someone walks from the bedroom to the kitchen.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFlip-Down Stabilizer Jacks\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Stabilizer Trailer Jacks in flip-down style (sold as pairs) are the most common corner stabilizer design for travel trailers. The jack swings down from a stored position and is cranked into contact with the ground by hand. The pair available here is rated at 650 lb lift \/ 1,000 lb support capacity per jack - appropriate for the stabilizer role, which is contact-and-support, not lifting.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo configurations are available: one pair with a handle included, one pair without. Unless you already have a jack handle or are replacing jacks on a rig that uses an existing handle, the pair with the handle is the practical choice.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTelescoping Stabilizer Jacks\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Telescoping Stabilizer Jack pair (rated at 2,000 lb capacity) and the single Stabilizer Jack (Telescopic 2K capacity) use a telescoping tube design that extends to accommodate a wider range of trailer heights without requiring a separate handle crank in all cases. The telescoping design handles more height variation than fixed-extension flip-down jacks, making them useful on trailers with higher frame clearance or uneven sites.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWheel Chocks\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWheel chocks go in before you disconnect the tow vehicle. They keep the trailer from rolling forward or backward off leveling blocks once the tongue is unhitched, and they hold position on sloped sites where gravity is working against you. Chock the wheels on both sides - in front of and behind the tire on the downhill side at minimum, both sides for maximum security.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eStandard Rubber and Plastic Chocks\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eValterra Wheel Chock\u003c\/span\u003e\u003cspan\u003e - A simple, cost-effective rubber chock. Good for flat or near-flat sites where you just need a basic stop in place before disconnecting.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHusky Wheel Chocks (pair)\u003c\/span\u003e\u003cspan\u003e - Husky's chocks are a step up in bulk and grip from the entry-level options. Sold in pairs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCaliber MR20K Red Wheel Chocks\u003c\/span\u003e\u003cspan\u003e - Bright red high-visibility chocks from Caliber. The color makes them easy to spot on the ground before pulling away - fewer forgotten chocks left at campsites.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSuper Wheel Chock with Rope\u003c\/span\u003e\u003cspan\u003e - The rope attachment is a practical feature: it lets you pull the chock out from behind the tire without lying on the ground to reach it. Useful on trailers with limited clearance between the tire and the frame.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eLeveling Chock Combo\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Curved Camper\/RV Leveler and Wheel Chock is a combined leveling-and-chocking solution in one piece. The curved profile lets you drive the trailer wheel up onto the ramp until the rig is level, at which point the chock portion holds the tire in place. Rated for trailers up to 30,000 lb with a heavy-duty honeycomb design. One unit is included per pack - most setups will need two (one per side of a tandem axle) for full side-to-side leveling.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis style of combined leveler-chock is particularly useful on sites that are slightly off-level and you'd rather drive onto a ramp than stack blocks by hand.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eJack Support Pads and Feet\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eJack Support Pads\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Camco RV Stabilizer Jack Pads (4-pack, 6-3\/16\" x 6-3\/16\", yellow, made in the USA) go under the stabilizer jack feet. They serve two purposes: protecting the ground from damage (campsite grass and gravel get torn up by bare metal jack feet) and providing a stable base on soft surfaces where a bare foot would sink in over time. The yellow color makes them easy to spot before pulling away. A 4-pack handles a standard 4-corner stabilizer setup.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eJack Support Foot\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Jack Support Foot (sold individually) is a replacement or upgrade foot plate for jacks that either came without one or where the original foot has corroded or cracked. Adds ground contact area to reduce sinking and provides a pivot point for swivel-style jacks.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTrailer Tongue Jack Stand\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Trailer Tongue Jack Stand (yellow) is used to support the tongue wheel or jack foot when the trailer is stored or parked for an extended period - particularly useful on softer ground where the tongue jack wheel would eventually sink. Keeps the tongue stable and the jack off direct ground contact during storage.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFastway Flip Automatic Folding Jack Foot\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Fastway Flip 6-inch automatic folding jack foot is an upgrade for manual tongue jacks. The foot flips up automatically as the jack retracts and folds flat for travel, reducing the amount of crank travel needed to clear the ground - about 6 inches less cranking per camp setup. Designed for 2-1\/4\" inner jack tubes. If you're keeping your existing manual jack and just want the convenience of an auto-folding foot, this is a bolt-on upgrade worth having.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGear Kits and Replacement Parts\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Gear Kit - Side Wind (Ram Jacks) is a replacement gear set for side-wind Ram trailer jacks. If your existing jack turns without moving the leg, stripped gears are usually the cause. Replacing the gear kit is faster and cheaper than replacing the entire jack and gets you back on the road without having to re-mount a new unit.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSpecialty and Hydraulic Items\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAtlas Tandem Hydraulic Jack Hose and Adapter Kit (Dual)\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA replacement hose and adapter kit for Atlas tandem hydraulic leveling jack systems - the type found on high-end fifth wheels and large travel trailers with factory hydraulic leveling. If you've developed a leak or need to replace aging hoses on an existing Atlas hydraulic system, this is the service kit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eStillwell Hydraulic Jack Power Unit - 3,000 PSI\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Stillwell hydraulic power unit (made in the USA) is the pump and motor assembly that drives a hydraulic leveling jack system. At 3,000 PSI output, this is a professional-grade component for custom trailer builds, serious fabrication work, or replacing a failed pump unit on a high-capacity leveling system.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eRV Bumper Receiver Items\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo items in this collection address the RV bumper receiver - the square tube at the rear of many bumper-pull travel trailers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003eRV Bumper 2\" Receiver Trailer Hitch\u003c\/span\u003e\u003cspan\u003e (3,500 lb capacity) converts the RV's rear bumper tube into a 2\" receiver hitch, allowing the owner to tow a dinghy, small utility trailer, or connect a bike rack from the back of the trailer. Confirm your RV's bumper tube dimensions and structural rating before using this for actual towing - bumper tubes vary widely in wall thickness and material, and not all are built to handle tongue weight loads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003eRV Bumper Receiver Adapter\u003c\/span\u003e\u003cspan\u003e (fits 4\" or 4-1\/2\" square tube) is clearly labeled NOT FOR TOWING - it is an accessory-mount-only adapter that converts the RV bumper tube into a receiver for accessories such as flag poles, cargo trays, or hitch-mount accessories that don't apply tongue weight. This distinction matters: using it as a tow hitch can cause the bumper to fail.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSetting Up Camp: The Right Order\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor first-time owners and anyone who wants to confirm they're doing this correctly:\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eDrive into the site\u003c\/span\u003e\u003cspan\u003e and check your side-to-side level before stopping. Adjust position if possible to minimize the amount of leveling needed.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003ePlace leveling ramps or blocks\u003c\/span\u003e\u003cspan\u003e on the low side under the tires. Drive onto them slowly. Re-check level.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eChock the wheels\u003c\/span\u003e\u003cspan\u003e - front and back of the tires on the downhill side at minimum - before touching the tongue jack or disconnecting.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eDisconnect the tow vehicle.\u003c\/span\u003e\u003cspan\u003e The chocks are now holding the trailer.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eLevel front-to-back\u003c\/span\u003e\u003cspan\u003e using the tongue jack. Raise or lower until the trailer reads level fore-to-aft.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eDeploy stabilizer jacks\u003c\/span\u003e\u003cspan\u003e at the corners until firm contact. Snug, not cranked - you're stabilizing, not lifting.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003ePlace jack pads\u003c\/span\u003e\u003cspan\u003e under the stabilizer feet if you're on soft ground or grass.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThat sequence - level on the tires, chock, disconnect, tongue jack, stabilizers - protects the frame, keeps the trailer in place, and means nothing shifts unexpectedly after the truck pulls away.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQ\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhat is the difference between a stabilizer jack and a leveling jack?\u003c\/span\u003e\u003cspan\u003e A leveling jack lifts the trailer to achieve a level position - this happens at the tongue (tongue jack) or on high-end rigs with full-corner leveling systems. A stabilizer jack is deployed after the trailer is already level to reduce bounce and movement inside. Stabilizer jacks should never be used to lift or level a travel trailer - the frame isn't designed to be loaded at those points, and you can bend it.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHow do I choose the right tongue jack?\u003c\/span\u003e\u003cspan\u003e Match the jack's lift capacity to your trailer's loaded tongue weight - typically 10-15% of the trailer's gross loaded weight. A 6,000 lb trailer carries roughly 600-900 lbs of tongue weight, so a 2,000 lb rated tongue jack provides adequate safety margin. For heavier trailers or fifth wheels, step up to a 3,000 lb or higher-rated jack. Consider electric if you set up camp frequently or want a faster, easier routine.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhen do you put wheel chocks in?\u003c\/span\u003e\u003cspan\u003e Before you disconnect the tow vehicle. Chocking the wheels while the trailer is still hitched means the chocks are in place to hold position the moment the hitch releases. Putting them in after creates a window where the trailer can roll or shift.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCan stabilizer jacks replace wheel chocks?\u003c\/span\u003e\u003cspan\u003e No. Stabilizer jacks are not designed to prevent the trailer from rolling - they reduce up-and-down and side-to-side movement inside, but they don't anchor the trailer against rolling on a slope. Wheel chocks are the only reliable way to prevent roll movement.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDo I need jack pads under my stabilizer jacks?\u003c\/span\u003e\u003cspan\u003e On grass, dirt, gravel, or any soft surface - yes. The pads distribute the load over a larger footprint, prevent the jack feet from sinking over a night or weekend, and protect the campsite. On hard concrete or asphalt they're less critical but still extend the life of the jack feet.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHow tight should stabilizer jacks be?\u003c\/span\u003e\u003cspan\u003e Snug - until the foot is firmly in contact with the ground and there's no more play in the jack. You're not trying to lift the trailer or compress the suspension; you're just taking out the slack so the rig can't bounce. Over-cranking on soft ground causes the foot to dig in and makes the jack harder to retract.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhat size tongue jack do I need for a travel trailer?\u003c\/span\u003e\u003cspan\u003e Most bumper-pull travel trailers in the 20-30 ft range run tongue weights between 500 and 1,200 lbs when loaded. A 2,000 lb rated tongue jack covers the majority of these setups with room to spare. Heavy toy haulers and larger trailers pushing 1,500+ lbs of tongue weight should step up to a 3,000 lb rated jack. Check your trailer's spec sheet for the listed tongue weight rating.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCan you use an electric jack without shore power?\u003c\/span\u003e\u003cspan\u003e Yes - electric tongue jacks run off the trailer's 12V battery, not shore power. A charged house battery is all that's required. A battery that's already low from running lights or appliances may not have enough power to run the jack reliably, so check battery condition before relying on an electric jack at a remote site.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cb id=\"docs-internal-guid-a9828422-7fff-bea5-8928-4bf6b7e365ea\"\u003e\u003cspan\u003eFor the towing hardware that connects to your trailer before any of this applies, browse our\u003c\/span\u003e\u003ca href=\"https:\/\/www.rvtraderaccessories.com\/collections\/trailer-hitches\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003etrailer hitches\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e,\u003c\/span\u003e\u003ca href=\"https:\/\/www.rvtraderaccessories.com\/collections\/ball-mounts\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eball mounts\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e, and\u003c\/span\u003e\u003ca href=\"https:\/\/www.rvtraderaccessories.com\/collections\/hitch-balls-hooks-plates\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ehitch balls, hooks, and plates\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e collections. For weight distribution on heavier rigs, the\u003c\/span\u003e\u003ca href=\"https:\/\/www.rvtrader.com\/blog\/2024\/09\/05\/hitch-types-and-ratings-rv-basics\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eRVTrader.com hitch guide\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e covers how all the components work together from hitch to chock.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e","products":[{"product_id":"ram-a-frame-jack-support-foot-2-000-lb-capacity","title":"Ram A-Frame Jack Support Foot - 2,000 lb. Capacity","description":"\u003cp\u003eJack foot with hardware.  Fits 2 inch O.D. jack tube.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits 2 inch jack tube\u003c\/li\u003e\n\u003cli\u003e1.7 inch tall - black powder coat finish\u003c\/li\u003e\n\u003cli\u003eIncludes retaining pin\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150157471927,"sku":"JF-100-B","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/f672ff39-9b92-4809-b06b-f0abbf389c1b_77bde23a-a2ad-44b3-9f33-8c939bd87cee.jpg?v=1758654453"},{"product_id":"a-frame-jack-support-foot-2-000-lb-capacity","title":"A-Frame Jack Support Foot - 2,000 lb. Capacity","description":"\u003cp\u003eJack foot with hardware. Fits 2 inch O.D. jack tube for use with RAM A-Frame jacks\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits 2 inch jack tube\u003c\/li\u003e\n\u003cli\u003e1.7 inch tall - zinc finish color may vary\u003c\/li\u003e\n\u003cli\u003eIncludes retaining pin\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150157602999,"sku":"JF-100-Z","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/e4e66094-89a6-4e26-8355-bffa714cc0d2_164afa96-1a28-4826-9a04-02f0ad8d1445.jpg?v=1758654451"},{"product_id":"ram-a-frame-side-wind-jack-2-000-lbs-capacity","title":"RAM A-Frame Side Wind Jack - 2,000 lbs. Capacity","description":"This is a Ram Sidewind Tongue Jack with a Black powered coat finish.\u003cdiv class=\"data item title active\" tabindex=\"0\" role=\"tab\" data-role=\"collapsible\" data-collapsible=\"true\" aria-controls=\"description\" aria-selected=\"false\" aria-expanded=\"true\"\u003eReplaced TJA-2000-S\u003c\/div\u003e\u003cul\u003e\n\u003cli class=\"data item title active\" tabindex=\"0\" role=\"tab\" data-role=\"collapsible\" data-collapsible=\"true\" aria-controls=\"description\" aria-selected=\"false\" aria-expanded=\"true\"\u003e14.5\" Travel\u003c\/li\u003e\n\u003cli class=\"data item title active\" tabindex=\"0\" role=\"tab\" data-role=\"collapsible\" data-collapsible=\"true\" aria-controls=\"description\" aria-selected=\"false\" aria-expanded=\"true\"\u003e25\" Jack height when retracted\u003c\/li\u003e\n\u003cli class=\"data item title active\" tabindex=\"0\" role=\"tab\" data-role=\"collapsible\" data-collapsible=\"true\" aria-controls=\"description\" aria-selected=\"false\" aria-expanded=\"true\"\u003e9.25\" bracket height from bottom of jack to bolt flange\u003c\/li\u003e\n\u003cli class=\"data item title active\" tabindex=\"0\" role=\"tab\" data-role=\"collapsible\" data-collapsible=\"true\" aria-controls=\"description\" aria-selected=\"false\" aria-expanded=\"true\"\u003e2,000 lbs. Lift Capacity\u003c\/li\u003e\n\u003cli class=\"data item title active\" tabindex=\"0\" role=\"tab\" data-role=\"collapsible\" data-collapsible=\"true\" aria-controls=\"description\" aria-selected=\"false\" aria-expanded=\"true\"\u003e3,000 lbs. Support Capacity\u003c\/li\u003e\n\u003cli class=\"data item title active\" tabindex=\"0\" role=\"tab\" data-role=\"collapsible\" data-collapsible=\"true\" aria-controls=\"description\" aria-selected=\"false\" aria-expanded=\"true\"\u003eLarge grooved comfort handle\u003c\/li\u003e\n\u003cli class=\"data item title active\" tabindex=\"0\" role=\"tab\" data-role=\"collapsible\" data-collapsible=\"true\" aria-controls=\"description\" aria-selected=\"false\" aria-expanded=\"true\"\u003eThere is also a Removable Caster or Foot Plate Available\u003c\/li\u003e\n\u003cli class=\"data item title active\" tabindex=\"0\" role=\"tab\" data-role=\"collapsible\" data-collapsible=\"true\" aria-controls=\"description\" aria-selected=\"false\" aria-expanded=\"true\"\u003eThe High Strength Mounting Bracket Provides Easy Bolt-On or Weld-On Installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv id=\"description\" class=\"data item content\" role=\"tabpanel\" aria-labelledby=\"tab-label-description\" data-role=\"content\" aria-hidden=\"false\"\u003e\u003cdiv class=\"product attribute description\"\u003e\u003cdiv class=\"value\"\u003e\n\u003ch4\u003eNot Included:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFoot:\u003cul\u003e\n\u003cli\u003eJF-100-B Black Finish\u003c\/li\u003e\n\u003cli\u003eJF-100-Z Zinc Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eJack Caster:\u003cul\u003e\n\u003cli\u003eJC-101 POLLY CASTER \u003c\/li\u003e\n\u003cli\u003eJC-102 STEEL CASTER\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eJack Mounting Bolt Kit- \u003cu\u003eJBK-38\u003c\/u\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150157635767,"sku":"TJA-2001S-B","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/836413da-2497-4a41-b99f-1283610a8ca5.jpg?v=1758345342"},{"product_id":"a-frame-jack-mount-hardware-kit-3-8-bolts-3","title":"A-Frame Jack Mount Hardware Kit - 3\/8\" Bolts (3)","description":"Used for mounting A-frame jacks to couplers. Includes three 3\/8\" course thread bolts, 5\/8\" long.","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150158356663,"sku":"JBK-38","price":1.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/b141f788-8b42-4888-8ae6-8e527a0226f8_f419da68-cdef-48ae-b782-1d40bab65d92.jpg?v=1758654456"},{"product_id":"replacement-jack-handle-for-ram-flip-down-styl-stabilizer-jacks","title":"Replacement Jack Handle for RAM Flip Down Styl Stabilizer Jacks","description":"\u003cp\u003eHandle used to raise and lower RAM Stabilizer Jacks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUse with SJ-100 stabilizer jack\u003c\/li\u003e\n\u003cli\u003eZinc plated finish\u003c\/li\u003e\n\u003cli\u003eHandle is 7\/16 inch diameter, 12 inch length\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150158389431,"sku":"SJ-002","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/36610fe0-a6a5-40b2-b947-e83f592a58b3.jpg?v=1757999839"},{"product_id":"electric-tongue-jack-4500-pound-capacity","title":"Electric Tongue Jack - 4500 Pound Capacity","description":"\u003cp\u003eStart and end your camping experience without breaking a sweat! Here’s the NEW Stromberg Carlson JET-4500, featuring ball screw technology for a smoother, quieter set-up and tear-down.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e4500 lb capacity\u003c\/li\u003e\r\n\u003cli\u003eBall screw mechanism\u003c\/li\u003e\r\n\u003cli\u003e18″ travel in 60 sec\u003c\/li\u003e\r\n\u003cli\u003eAdditional 4.5″ drop-down leg\u003c\/li\u003e\r\n\u003cli\u003e9.5″-32″ height range from ground to mounting plate\u003c\/li\u003e\r\n\u003cli\u003e3 separate LED lights\u003c\/li\u003e\r\n\u003cli\u003eEmergency crank-through head\u003c\/li\u003e\r\n\u003cli\u003eBuilt-in level\u003c\/li\u003e\r\n\u003cli\u003e2.25″ heavy wall outer tube\u003c\/li\u003e\r\n\u003cli\u003eMade for A-Frame trailers\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150159929527,"sku":"JET-4500","price":291.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/febfaeea-a9cb-46a5-8e39-f5de198fc531.jpg?v=1757920824"},{"product_id":"a-frame-jack-6-inch-caster-wheel","title":"A-Frame Jack, 6 Inch Caster Wheel","description":"\u003cp\u003eCaster assembly with 2 x 6 inch poly wheel. Fits 2 inch O.D. jack tube.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits 2 inch jack tube\u003c\/li\u003e\n\u003cli\u003e6 inch poly wheel\u003c\/li\u003e\n\u003cli\u003eIncludes retaining pin\u003c\/li\u003e\n\u003cli\u003e1,200 lb. capacity\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150160224439,"sku":"JC-101","price":21.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/898d8a90-d32f-4b7c-99e3-1c761ff8cce1_fc2146d2-38f1-4957-8990-d7e75011e76d.jpg?v=1758364227"},{"product_id":"ram-5-000-lb-support-3-000-lb-lift-capacity-swivel-pipe-mount-top-wind-trailer-jack","title":"Ram 5,000 lb. Support, 3,000 lb. Lift Capacity, Swivel Pipe Mount, Top Wind Trailer Jack","description":"\u003cp\u003eTopwind Pipe Mount Swivel Jack \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e10\" Travel\u003c\/li\u003e\n\u003cli\u003e11\" bracket height from bottom of jack to center of swivel mount\u003c\/li\u003e\n\u003cli\u003e17\" jack height when fully retracted\u003c\/li\u003e\n\u003cli\u003e5,000 lb. Support Capacity\u003c\/li\u003e\n\u003cli\u003e3,000 lb. Lift Capacity\u003c\/li\u003e\n\u003cli\u003e3-3\/4\" x 7-1\/2\" welded on durable zinc sand foot\u003c\/li\u003e\n\u003cli\u003eSolid-bar crank handle with red claw knob\u003c\/li\u003e\n\u003cli\u003eBlack painted outer tube and zinc plated inner tube\u003c\/li\u003e\n\u003cli\u003eIncludes weld-on pipe mount and 9\/16 inch pin and clip\u003c\/li\u003e\n\u003cli\u003eComfortable claw knob and clear zinc solid bar handle that can be folded away when not in use\u003c\/li\u003e\n\u003cli\u003e9\/16\" pin and lanyard assembly affixed to the jack\u003c\/li\u003e\n\u003cli\u003eGrease zerk for easy greasing of jack\u003c\/li\u003e\n\u003cli\u003eDurable exterior grade black powder coat finish on outer tube\u003c\/li\u003e\n\u003cli\u003eIncludes a 2\" raw round weld on mating pipe\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150160453815,"sku":"TJP-5001-B","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/fb1078ed-c9d2-46c7-9a36-3297c38e8c52.jpg?v=1757920824"},{"product_id":"ram-a-frame-trailer-jack-2-000-lbs-capacity-top-wind-jack-with-bracket","title":"RAM A-Frame Trailer Jack - 2,000 lbs. Capacity Top Wind Jack with Bracket","description":"\u003cp\u003e\u003cspan class=\"a-list-item a-size-base\" style=\"box-sizing: border-box; font-size: 12pt; line-height: 20px !important; color: #0f1111;\"\u003eFor use with trailers with A-frame couplers\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cul class=\"a-unordered-list a-vertical a-spacing-none\" style=\"box-sizing: border-box; margin: 0px 0px 0px 18px; color: #0f1111; padding: 0px; font-family: 'Amazon Ember', Arial, sans-serif; font-size: 14px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: #ffffff; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;\"\u003e\n\u003cli class=\"a-spacing-small\" style=\"box-sizing: border-box; list-style: disc; overflow-wrap: break-word; margin: 0px;\"\u003e\u003cspan class=\"a-list-item a-size-base\" style=\"box-sizing: border-box; font-size: 12pt; line-height: 20px !important; color: #0f1111;\"\u003e14 inch travel. 20\" retracted, 34\" extended\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-small\" style=\"box-sizing: border-box; list-style: disc; overflow-wrap: break-word; margin: 0px;\"\u003e\u003cspan class=\"a-list-item a-size-base\" style=\"box-sizing: border-box; font-size: 12pt; line-height: 20px !important; color: #0f1111;\"\u003e3,000lb Support Capacity \/ 2,000lb Lift Capacity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-small\" style=\"box-sizing: border-box; list-style: disc; overflow-wrap: break-word; margin: 0px;\"\u003e\u003cspan class=\"a-list-item a-size-base\" style=\"box-sizing: border-box; font-size: 12pt; line-height: 20px !important; color: #0f1111;\"\u003e2-1\/4\" outer tube diameter, 2\" inner tube diameter\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-small\" style=\"box-sizing: border-box; list-style: disc; overflow-wrap: break-word; margin: 0px;\"\u003eDurable exterior grade black powder coat finish on outer and inner tubes\u003c\/li\u003e\n\u003cli class=\"a-spacing-small\" style=\"box-sizing: border-box; list-style: disc; overflow-wrap: break-word; margin: 0px;\"\u003e\u003cspan class=\"a-list-item a-size-base\" style=\"box-sizing: border-box; font-size: 12pt; line-height: 20px !important; color: #0f1111;\"\u003eLarge grooved comfort handle to operate the jack\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-small\" style=\"box-sizing: border-box; list-style: disc; overflow-wrap: break-word; margin: 0px;\"\u003e\u003cspan class=\"a-list-item a-size-base\" style=\"box-sizing: border-box; font-size: 12pt; line-height: 20px !important; color: #0f1111;\"\u003eMounting hardware not included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150160945335,"sku":"TJA-2000-B","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/a5b75db2-4b65-4805-8a15-d4a25d2d4b43.jpg?v=1758654528"},{"product_id":"a-frame-trailer-jack-with-foot-and-mounting-hardware-2-000-lb","title":"A-Frame Trailer Jack with Foot and Mounting Hardware - 2,000 lb.","description":"\u003cp\u003eThis RAM Topwind Tongue Jack comes with durable exterior grade black powder coat finish. It also provides a thicker inner tube for greater side load capacities. It is Ideal for RV and Travel Trailer applications. All mounting hardware included\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e14\" Travel\u003c\/li\u003e\n\u003cli\u003e13\" Clearance \u003c\/li\u003e\n\u003cli\u003e2,000 lbs. Capacity\u003c\/li\u003e\n\u003cli\u003eZinc Plated Jack Foot\u003c\/li\u003e\n\u003cli\u003eThe Mounting Bracket Provides Easy Bolt-On or Weld-On Installation \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150162026679,"sku":"JB-2000B-100Z","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/c42480f9-8884-43f8-9831-237c8c5d9919.jpg?v=1775350449"},{"product_id":"lippert-quick-drop-drill-operated-tongue-jack-2-000-lbs-14-travel","title":"Lippert Quick Drop Drill-Operated Tongue Jack, 2,000 lbs, 14\" Travel","description":"\u003cp\u003e\u003cspan style=\"color: #5a5a5a; font-family: texgyreadventor; font-size: 17.5px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: #ffffff; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial; display: inline !important; float: none;\"\u003eCan't decide between an automatic, power tongue jack or a manual jack? Why not choose both? The Quick Drop tongue jack by Lippert gives you the best of both worlds. Uniquely designed with a 3\/4\" hex nut at the top of the crank, you can conveniently use a power drill to raise and lower your A-frame trailer without the hassle and strain of manually cranking your jack.\u003c\/span\u003e\u003c\/p\u003e\u003cul style=\"margin-top: 0px; margin-bottom: 2.5rem; padding-left: 20px; color: #5a5a5a; font-family: texgyreadventor; font-size: 17.5px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: #f1f1f1; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;\"\u003e\n\u003cli style=\"margin-top: 0px; margin-bottom: 1rem;\"\u003ePower or manual operation\u003c\/li\u003e\n\u003cli style=\"margin-top: 0px; margin-bottom: 1rem;\"\u003eRaise or lower jack using a power drill and 3\/4\" socket head (not included)\u003c\/li\u003e\n\u003cli style=\"margin-top: 0px; margin-bottom: 1rem;\"\u003eDurable, black powder-coated finish\u003c\/li\u003e\n\u003cli style=\"margin-top: 0px; margin-bottom: 1rem;\"\u003eRemoveable foot pad and locking pin included\u003c\/li\u003e\n\u003cli style=\"margin-top: 0px; margin-bottom: 1rem;\"\u003eDesigned for A-frame, RV travel trailers, cargo trailers or utility trailers\u003c\/li\u003e\n\u003cli style=\"margin-top: 0px; margin-bottom: 1rem;\"\u003e2,000 lb. load capacity\u003c\/li\u003e\n\u003cli style=\"margin-top: 0px; margin-bottom: 1rem;\"\u003e14\" stroke\u003c\/li\u003e\n\u003cli style=\"margin-top: 0px; margin-bottom: 1rem;\"\u003e5.4\" footpad\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150162124983,"sku":"733926","price":73.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/5c8ac840-2e78-40c5-8bfc-ce95fefa1275.jpg?v=1757920832"},{"product_id":"ram-5-000-lb-support-capacity-3-000-lb-lift-capacity-a-frame-trailer-jack-taller-version","title":"Ram 5,000 lb. Support Capacity, 3,000 lb. Lift Capacity, A-Frame Trailer Jack (Taller Version)","description":"This is a Ram Topwind Tongue Jack with a Black powered coat finish. For use with trailers with A-frame couplers.\u003cul\u003e\n\u003cli class=\"data item title active\" tabindex=\"0\" role=\"tab\" data-role=\"collapsible\" data-collapsible=\"true\" aria-controls=\"description\" aria-selected=\"false\" aria-expanded=\"true\"\u003e15\" Travel\u003c\/li\u003e\n\u003cli class=\"data item title active\" tabindex=\"0\" role=\"tab\" data-role=\"collapsible\" data-collapsible=\"true\" aria-controls=\"description\" aria-selected=\"false\" aria-expanded=\"true\"\u003e12.50\" Clearance\u003c\/li\u003e\n\u003cli class=\"data item title active\" tabindex=\"0\" role=\"tab\" data-role=\"collapsible\" data-collapsible=\"true\" aria-controls=\"description\" aria-selected=\"false\" aria-expanded=\"true\"\u003e5,000 lbs. Support Capacity\u003c\/li\u003e\n\u003cli class=\"data item title active\" tabindex=\"0\" role=\"tab\" data-role=\"collapsible\" data-collapsible=\"true\" aria-controls=\"description\" aria-selected=\"false\" aria-expanded=\"true\"\u003e3,000 lbs. Lift Capacity\u003c\/li\u003e\n\u003cli class=\"data item title active\" tabindex=\"0\" role=\"tab\" data-role=\"collapsible\" data-collapsible=\"true\" aria-controls=\"description\" aria-selected=\"false\" aria-expanded=\"true\"\u003eThere is also a Removable Caster or Foot Plate Available\u003c\/li\u003e\n\u003cli class=\"data item title active\" tabindex=\"0\" role=\"tab\" data-role=\"collapsible\" data-collapsible=\"true\" aria-controls=\"description\" aria-selected=\"false\" aria-expanded=\"true\"\u003eThe High Strength Mounting Bracket Provides Easy Bolt-On or Weld-On Installation\u003c\/li\u003e\n\u003cli class=\"data item title active\" tabindex=\"0\" role=\"tab\" data-role=\"collapsible\" data-collapsible=\"true\" aria-controls=\"description\" aria-selected=\"false\" aria-expanded=\"true\"\u003eComfortable claw knob and zinc bar handle that can be folded away when not in use\u003c\/li\u003e\n\u003cli class=\"data item title active\" tabindex=\"0\" role=\"tab\" data-role=\"collapsible\" data-collapsible=\"true\" aria-controls=\"description\" aria-selected=\"false\" aria-expanded=\"true\"\u003eDurable ixterior grade black powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv id=\"description\" class=\"data item content\" role=\"tabpanel\" aria-labelledby=\"tab-label-description\" data-role=\"content\" aria-hidden=\"false\"\u003e\u003cdiv class=\"product attribute description\"\u003e\u003cdiv class=\"value\"\u003e\n\u003ch4\u003eNot Included:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFoot:\u003cul\u003e\n\u003cli\u003eJF-100-B Black Finish\u003c\/li\u003e\n\u003cli\u003eJF-100-Z Zinc Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eJack Caster:\u003cul\u003e\n\u003cli\u003eJC-101 POLLY CASTER \u003c\/li\u003e\n\u003cli\u003eJC-102 STEEL CASTER\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eJack Mounting Bolt Kit- \u003cu\u003eJBK-38\u003c\/u\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150162223287,"sku":"TJA-5000T-B","price":43.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/39ad2337-931c-4a00-ab57-90a6b5dd5034.jpg?v=1758654453"},{"product_id":"top-wind-handle-with-bolt-and-nut-for-ram-brand-2k-and-5k-tja-5000-a-frame-jacks","title":"Top Wind Handle with Bolt and Nut for Ram Brand 2K and 5K (TJA-5000) A-frame Jacks","description":"\u003cp\u003eFits 2K \u0026amp; 5K rated top wind Ram brand round tube jacks only.   TJA-2000-B, TJA-2002-B\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlack handle\u003c\/li\u003e\n\u003cli\u003eZinc plated\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150162583735,"sku":"TJA-2000-HD","price":12.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/c1b3f6da-a20f-4c69-bc8a-e49c7a4be6a5_8d465e5a-bfd0-43d3-a73e-14b1ca9fc1ea.jpg?v=1758654624"},{"product_id":"ram-square-tube-7-000-lbs-capacity-side-wind-weld-on-jack","title":"Ram Square Tube 7,000 lbs. Lift Capacity Side Wind Weld-On Jack","description":"\u003cp\u003eSidewind Square Tube Jack has 7,000 lbs. lift capacity and 8,000 lbs. support capacity. Jack has a 2-1\/2 inch outer tube, 6 x 8 inch foot pad.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSidewind square tube jack\u003c\/li\u003e\n\u003cli\u003eDrop leg design\u003c\/li\u003e\n\u003cli\u003eGray primer outer tube with zinc plated inner tube\u003c\/li\u003e\n\u003cli\u003eMounting is done by direct weld\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150163042487,"sku":"TJD-7000-S","price":80.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/2587d280-2b3e-40bf-8e96-995206175161.jpg?v=1758654624"},{"product_id":"ram-5-000-lb-support-3-000-lift-capacity-swivel-pipe-mount-top-wind-trailer-jack","title":"Ram 5,000 lb. Support, 3,000 Lift Capacity, Swivel Pipe Mount, Top Wind Trailer Jack","description":"\u003cp\u003eTopwind Pipe Mount Swivel Jack \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e15\" Travel\u003c\/li\u003e\n\u003cli\u003e16\" bracket height from bottom of jack to center of swivel mount\u003c\/li\u003e\n\u003cli\u003e22\" jack height when fully retracted\u003c\/li\u003e\n\u003cli\u003e5,000 lb. Lift Capacity\u003c\/li\u003e\n\u003cli\u003e3-3\/4\" x 7-1\/2\" welded on durable zinc sand foot\u003c\/li\u003e\n\u003cli\u003eBlack painted outer tube and zinc plated inner tube\u003c\/li\u003e\n\u003cli\u003eIncludes weld-on pipe mount and 9\/16 inch pin and clip\u003c\/li\u003e\n\u003cli\u003eComfortable claw knob and clear zinc solid bar handle that can be folded away when not in use\u003c\/li\u003e\n\u003cli\u003e9\/16\" pin and lanyard assembly affixed to the jack\u003c\/li\u003e\n\u003cli\u003eGrease zerk for easy greasing of jack\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150163566775,"sku":"TJP-5002-B","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/8e7ce29c-a4d4-4734-a77a-2c07f5f7d6a0.jpg?v=1758343529"},{"product_id":"ram-15k-heavy-duty-two-speed-square-tube-jack","title":"Ram 15K Heavy-Duty Two Speed Square Tube Jack","description":"\u003cp\u003eThis 15K support capacity jack is designed to be welded directly to the trailer. 12,000 lb lift capacity and comes with handle.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e15K Companion Jack- \u003cu\u003eTJD-15K-F\u003c\/u\u003e\n\u003c\/li\u003e\n\u003cli\u003ePull pin is faced toward the tow vehicle and handle post is sidewind\u003c\/li\u003e\n\u003cli\u003eBrass bushings for easier cranking and reduced wear\u003c\/li\u003e\n\u003cli\u003eBlack painted inner and outer tube\u003c\/li\u003e\n\u003cli\u003eCan be used with the TJD-15K-F as a companion jack - see link above\u003c\/li\u003e\n\u003cli\u003eEasy access gear box and grease fittings for routine maintenance\u003c\/li\u003e\n\u003cli\u003e9\" x 9\" foot plate with weep holes for water drainage\u003c\/li\u003e\n\u003cli\u003eIncludes handle assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\u003ctr class=\"odd\"\u003e\n\u003ctd\u003eLift Capacity\u003c\/td\u003e\n\u003ctd\u003e12,000 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport Capacity\u003c\/td\u003e\n\u003ctd\u003e15,000 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003ctd\u003eTravel\u003c\/td\u003e\n\u003ctd\u003e12.50 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtended (B)\u003c\/td\u003e\n\u003ctd\u003e55.25 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003ctd\u003eOuter Tube\u003c\/td\u003e\n\u003ctd\u003e4.5 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eRetracted (A)\u003c\/td\u003e\n\u003ctd\u003e29 inches\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150164320439,"sku":"TJD2SP-15K","price":297.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/d47fa5a7-f68d-4af5-9f07-676ba156b94f.jpg?v=1758258934"},{"product_id":"a-frame-trailer-jack-with-foot-and-mounting-hardware","title":"A-Frame Trailer Jack with Foot and Mounting Hardware","description":"\u003cp\u003eThis RAM Topwind Tongue Jack comes with durable exterior grade black powder coat finish. It also provides a thicker inner tube for greater side load capacities. It is Ideal for RV and Travel Trailer applications. All mounting hardware included\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e15\" Travel\u003c\/li\u003e\n\u003cli\u003e12.5\" Clearance \u003c\/li\u003e\n\u003cli\u003e5,000lbs Capacity\u003c\/li\u003e\n\u003cli\u003eBlack Powder Coated Jack Foot\u003c\/li\u003e\n\u003cli\u003eSolid-Bar Handle with Red Plastic Claw Knob for easy cranking\u003c\/li\u003e\n\u003cli\u003eThe Mounting Bracket Provides Easy Bolt-On or Weld-On Installation \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150164713655,"sku":"JB-5000TB-100B","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/8a511d2b-7e2b-4f99-9de2-94b0010d473a.jpg?v=1757654119"},{"product_id":"telescoping-stabilizer-jack-sjr-208-2pk-pair-2","title":"Telescoping Stabilizer Jack (SJR-208-2PK) - Pair (2)","description":"\u003cul\u003e\n\u003cli\u003eUse on utility trailers, horse trailers, car haulers, stock trailers and more.\u003c\/li\u003e\n\u003cli\u003e2,000 lbs lift capacity, 18\" travel. Zinc plated for corrosion resistance.\u003c\/li\u003e\n\u003cli\u003e20 inches overall height, 1-3\/16\" from center of hole to center of hole, Drop leg width - 1-1\/4\".\u003c\/li\u003e\n\u003cli\u003eMounting bracket dimensions: 8\" long x 1-1\/2\" wide, 5-1\/4\" footplate diameter.\u003c\/li\u003e\n\u003cli\u003eProvides rear support to prevent trailer tipping when unloading.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150164811959,"sku":"SJR-208-2PK","price":69.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/4d7a50c9-41a8-40ba-b108-b0364b43a0d2.jpg?v=1757920854"},{"product_id":"stabilizer-jack-flip-down-style-650-lb-lift-1-000-lb-support-capacity","title":"Stabilizer Jack - Flip Down Style - 650 lb. Lift \/ 1,000 lb. Support Capacity","description":"\u003cp\u003eRectangular steel tubing gives a support leg with high strength and minimal weight. The leg extends a full 6 inches and is infinitely adjustable. A four inch square steel foot pad completes the rugged unit. Stores up and out of the way when not in use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInfinitely adjustable length\u003c\/li\u003e\n\u003cli\u003eJack leg travel is 6 inches\u003c\/li\u003e\n\u003cli\u003eLocks in the up or down position\u003c\/li\u003e\n\u003cli\u003e4 inch square steel foot pad\u003c\/li\u003e\n\u003cli\u003eBlack painted finish\u003c\/li\u003e\n\u003cli\u003eAdjustable from 11-1\/2″ to 17-3\/4″” vertical height\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150164877495,"sku":"SJ-100","price":20.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/e6703c1c-a0d0-4666-83e4-6b2e42f8a4e0.jpg?v=1758515453"},{"product_id":"a-frame-trailer-jack-5-000-lbs-capacity-15-inch-travel-top-wind","title":"A-Frame Trailer Jack - 5,000 lbs. Capacity, 15 Inch Travel, Top Wind","description":"\u003cp\u003eIdeal for RV and travel trailer applications, the Rigid Hitch A-Frame trailer jack. 5,000 lbs capacity.\u003c\/p\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150165008567,"sku":"RHI-0013","price":43.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/8e9e6aef-f5d1-4e02-bacc-50d32cf23094.jpg?v=1757920855"},{"product_id":"ram-2-000-lb-pipe-mount-top-wind-swivel-jack","title":"Ram 2,000 Lb. Pipe Mount, Top Wind, Swivel Jack","description":"\u003cp\u003eTopwind Pipe Mount Swivel Jack \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e15\" Travel\u003c\/li\u003e\n\u003cli\u003e2,000 lb. Capacity\u003c\/li\u003e\n\u003cli\u003eTopwind pipe mount swivel jack\u003c\/li\u003e\n\u003cli\u003eSolid-bar crank handle with red claw knob\u003c\/li\u003e\n\u003cli\u003eIncludes weld-on pipe mount and 9\/16 inch pin and clip\u003c\/li\u003e\n\u003cli\u003eBlack painted outer tube and zinc plated inner tube with disc foot\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150165270711,"sku":"TJP-2002-B","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/697566d1-d536-4ebb-bcb9-6187a73a0f12_81baf3cb-630f-4f69-9899-a664c6f5a2a7.jpg?v=1758670230"},{"product_id":"a-frame-trailer-jack-with-foot-and-mounting-hardware-top-wind","title":"A-Frame Trailer Jack with Foot and Mounting Hardware - Top Wind","description":"\u003cp\u003eThis RAM Topwind Tongue Jack comes with durable exterior grade black powder coat finish. It also provides a thicker inner tube for greater side load capacities. It is Ideal for RV and Travel Trailer applications. All mounting hardware included\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e15\" Travel\u003c\/li\u003e\n\u003cli\u003e12.5\" Clearance \u003c\/li\u003e\n\u003cli\u003e5,000 lbs. Capacity\u003c\/li\u003e\n\u003cli\u003eSolid-Bar Handle with Red Plastic Claw Knob for easy cranking\u003c\/li\u003e\n\u003cli\u003eZinc Plated Jack Foot\u003c\/li\u003e\n\u003cli\u003eThe Mounting Bracket Provides Easy Bolt-On or Weld-On Installation \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150165500087,"sku":"JB-5000TB-100Z","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/1ecf62e3-104d-4ed3-ab1a-0a964286300d.jpg?v=1775350468"},{"product_id":"ram-2-000-lbs-lift-capacity-pipe-mount-top-wind-swivel-jack","title":"Ram 2,000 lbs Lift Capacity, Pipe Mount, Top Wind, Swivel Jack","description":"\u003cp\u003eTopwind Pipe Mount Swivel Jack includes \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e10\" Travel\u003c\/li\u003e\n\u003cli\u003e2,000 lbs. Lift Capacity\u003c\/li\u003e\n\u003cli\u003e3-3\/4\" x 7-1\/2\" welded on durable zinc sand foot\u003c\/li\u003e\n\u003cli\u003e2\" raw round weld on mating pipe\u003c\/li\u003e\n\u003cli\u003eSolid-bar crank handle with red claw knob\u003c\/li\u003e\n\u003cli\u003eIncludes weld-on pipe mount and 9\/16 inch pin and clip.\u003c\/li\u003e\n\u003cli\u003eBlack painted outer tube and zinc plated inner tube with \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150165532855,"sku":"TJP-2001-B","price":41.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/1acce677-3276-46f1-8613-56f75c736973_d96d2d56-f2c7-4bd1-8ae6-eedab27b1b86.jpg?v=1758654619"},{"product_id":"ram-square-tube-7-000-lbs-capacity-drop-leg-top-wind-weld-on-jack","title":"Ram Square Tube 7,000 lbs. Capacity, Drop Leg, Top Wind, Weld-On Jack","description":"\u003cp\u003eTopwind Square Tube Jack has 7,000 lbs. lift capacity and 8,000 lbs. support capacity. Jack has a 2-1\/2 inch outer tube, 6 x 8 inch foot pad and solid-bar crank handle with claw knob.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTopwind square tube jack\u003c\/li\u003e\n\u003cli\u003eSolid-bar crank handle with claw knob\u003c\/li\u003e\n\u003cli\u003eDrop leg design\u003c\/li\u003e\n\u003cli\u003eBlack primer outer tube with zinc plated inner tube\u003c\/li\u003e\n\u003cli\u003eMounting is done by direct weld\u003c\/li\u003e\n\u003cli\u003eSimilar to Bulldog jack HB-190704\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150165631159,"sku":"TJD-7000","price":63.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/ea1e1be7-8dd5-4600-88a6-30bdbccfa33f.jpg?v=1779513784"},{"product_id":"heavy-duty-square-tube-drop-leg-jack-weld-on-15k","title":"Heavy Duty Square Tube Drop Leg Jack - Weld On - 15K","description":"\u003cp\u003eHeavy Duty Square Tube Jack with FRONT facing pull pin and spring return drop leg. 12,000 lbs. lift capacity and 15,000 lbs. support capacity. INCLUDES CRANK HANDLE.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e12,000 pound lift capacity, 15,000 support capacity\u003c\/li\u003e\n\u003cli\u003e13 inches of additional drop leg extension with standard disc foot\u003c\/li\u003e\n\u003cli\u003eDrop leg pull pin positioned to the FRONT of the jack\u003c\/li\u003e\n\u003cli\u003eSidewind design - can be used in tandem\u003c\/li\u003e\n\u003cli\u003eMounting is done by direct weld\u003c\/li\u003e\n\u003cli\u003e9 x 9 inch foot plate with weep holes for water drainage\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eMfg. #TJD-15000SP-F\u003c\/p\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150165729463,"sku":"TJD-15K-F","price":259.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/89c17af6-9c87-49d3-9e47-8354d613ce24_6230d0de-7423-4757-a190-579053b49dac.jpg?v=1757654126"},{"product_id":"ram-marine-bolt-on-swivel-jack-1-000-lb-capacity","title":"Ram Marine Bolt-On Swivel Jack - 1,000 lb. Capacity","description":"\u003cp\u003eMarine Swivel Jack with Bolt-On Mounting Bracket.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e10\" Travel\u003c\/li\u003e\n\u003cli\u003e1,000 lb. Capacity\u003c\/li\u003e\n\u003cli\u003eIncludes 6 inch poly wheel\u003c\/li\u003e\n\u003cli\u003eBolt-on snap ring swivel jack \u003c\/li\u003e\n\u003cli\u003eZinc plated with 100 hour salt spray rating\u003c\/li\u003e\n\u003cli\u003eMounts to trailer frames up to 3 inch x 5 inch\u003c\/li\u003e\n\u003cli\u003eBolt-through design for added side load support\u003c\/li\u003e\n\u003cli\u003eIncludes bolt-on mounting bracket with mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150165762231,"sku":"MJ-1206-B","price":67.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/534c463d-52f3-4f21-9584-9056c9ca4769.jpg?v=1757920850"},{"product_id":"a-frame-trailer-jack-with-wheel-and-mounting-hardware-2-000-lb","title":"A-Frame Trailer Jack with Wheel and Mounting Hardware - 2,000 lb.","description":"\u003cp\u003eThis RAM Topwind Tongue Jack comes with durable exterior grade black powder coat finish. It also provides a thicker inner tube for greater side load capacities. It is Ideal for RV and Travel Trailer applications. All mounting hardware included\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Any system's capacity is limited to the lowest capacity of its components. In this case, the lowest rated component is the wheel rated at 1,200 lbs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e14\" Travel\u003c\/li\u003e\n\u003cli\u003e13\" Clearance \u003c\/li\u003e\n\u003cli\u003e2,000lbs Capacity\u003c\/li\u003e\n\u003cli\u003e6\" poly wheel\u003c\/li\u003e\n\u003cli\u003eThe Mounting Bracket Provides Easy Bolt-On or Weld-On Installation \u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNot Included:\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFoot- \u003cu\u003eJF-100-B\u003c\/u\u003e\n\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150165827767,"sku":"JB-2000B-101","price":50.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/727b69cb-0788-4bd8-8f7b-5d13ea123e5c.jpg?v=1757920853"},{"product_id":"stabilizer-jack-telescopic-2k-capacity","title":"Stabilizer Jack (Telescopic 2K capacity)","description":"\u003cp\u003eDesigned to provide sturdy support for many types of utility trailers such as; horse trailers, car trailers, car haulers and stock trailers. Plated for corrosion resistance, Stabilizers eliminate the worry of the trailer tipping to the rear when unloading equipment or \"toys\".\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUse on utility trailers, horse trailers, car haulers, stock trailers and more\u003c\/li\u003e\n\u003cli\u003eZinc plated for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eProvides rear support to prevent trailer tipping when unloading\u003c\/li\u003e\n\u003cli\u003eWeld-on installation\u003c\/li\u003e\n\u003cli\u003e20 inches overall height\u003c\/li\u003e\n\u003cli\u003e1-3\/16\" from center of hole to center of hole\u003c\/li\u003e\n\u003cli\u003eDrop leg width - 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003eMounting bracket dimensions: 8 inch long x 1-1\/2 inch wide, weldable unfinished raw steel\u003c\/li\u003e\n\u003cli\u003e5-1\/4 inch footplate diameter\u003c\/li\u003e\n\u003cli\u003eSnap pin included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150166450359,"sku":"SJ-R208","price":35.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/ff4fa2c2-6388-4cc9-a021-4abec50df6c5_3b60fc0e-9e38-4ccf-a862-d97f2d161ed5.jpg?v=1758191430"},{"product_id":"trailer-tongue-jack-stand-yellow","title":"Trailer Tongue Jack Stand - Yellow","description":"\u003cp\u003eThe Camco Jack Stand is a heavy duty, durable way to stabilize your trailer tongue without the need for heavy cinder blocks or wood. The sturdy base has a weight capacity of 5,000 pounds, but is lightweight and easy to store. The recessed dock supports the weight of the tongue, preventing it from slipping and evenly distributing the weight, helping it to not sink into soft ground. Camco's Jack Stand is made of UV stabilized resin for many years of use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlease note:\u003c\/strong\u003e The Jack Stand is designed for use with the inner post of the jack.  Will not work with caster wheel or jack foot.\u003c\/li\u003e\n\u003cli\u003eWill accept inner jack posts up to 2 inches in diameter\u003c\/li\u003e\n\u003cli\u003e8-1\/4 inches tall\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150166745271,"sku":"44635","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/1d0bd26c-2556-487c-b83d-2420849c3203_1913cf88-f2ce-4ab3-9949-fbc4392474de.jpg?v=1758654465"},{"product_id":"a-frame-jack-6-inch-steel-caster-wheel-1-200-lb-capacity","title":"A-Frame Jack 6 inch Steel Caster Wheel - 1,200 lb. Capacity","description":"\u003cp\u003eCaster assembly with 2 x 6 inch steel wheel. Fits 2 inch O.D. jack tube.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits 2 inch jack tube\u003c\/li\u003e\n\u003cli\u003e6 inch steel wheel\u003c\/li\u003e\n\u003cli\u003eIncludes retaining pin\u003c\/li\u003e\n\u003cli\u003e1,200 lb. capacity\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150166909111,"sku":"JC-102","price":22.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/ea351e22-f077-4228-a908-7d9beb31ac71.jpg?v=1758170837"},{"product_id":"bulldog-trailer-jack-sidewind-crank-assembly-for-180s-jacks","title":"Bulldog Trailer Jack Sidewind Crank Assembly for 180's Jacks","description":"\u003cp\u003eSidewind Crank Handle Assembly used on Bulldog 12,000 heavy duty square jacks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e13 1\/2 inch radius\u003c\/li\u003e\n\u003cli\u003eVertical clevis\u003c\/li\u003e\n\u003cli\u003eExtends 17 1\/2 inches from the jack\u003c\/li\u003e\n\u003cli\u003eMounting hardware included\u003c\/li\u003e\n\u003cli\u003eBlack primer finish\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150167761079,"sku":"HB-15181","price":43.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/d3ea3802-eae8-4c61-9ba3-f0c24ebe4b7b.jpg?v=1757652356"},{"product_id":"jack-top-cap-side-wind-ram-jacks","title":"Jack Top Cap - Side Wind - Ram Jacks","description":"\u003cp\u003eFits 2,000 lbs. rated, side wind RAM brand round tube 2,000 lb. jacks and 1,500 lb. marine jacks only.\u003c\/p\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150167793847,"sku":"TJA-2000S-CP","price":1.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/001df762-1379-4d49-82b8-5905f2b24033.jpg?v=1758654621"},{"product_id":"husky-brute-power-tongue-jack-3-000-lb-lift-capacity","title":"Husky Brute Power Tongue Jack - 3,000 lb. Lift Capacity","description":"\u003cp\u003eThe Husky Brute is loaded with features and is the new standard in RV jacks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e18\" Travel\u003c\/li\u003e\n\u003cli\u003e3,000lb Capacity\u003c\/li\u003e\n\u003cli\u003eHammer gray finish\u003c\/li\u003e\n\u003cli\u003eWater Resistant Motor and Gear Housing\u003c\/li\u003e\n\u003cli\u003eIncludes Built-In 7-Way Plug Storage Bracket\u003c\/li\u003e\n\u003cli\u003e3-Sided LED Light System Illuminates Entire Area\u003c\/li\u003e\n\u003cli\u003eBall and Screw Rolling Friction System Eliminates Drag\u003c\/li\u003e\n\u003cli\u003e6\" Drop Leg Shortens Time to Set Jack and Reduces Wear on Motor\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150168809655,"sku":"87248","price":398.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/94c63706-9e8a-4c25-ac27-68cbdcccde3a.jpg?v=1757920889"},{"product_id":"jack-support-foot","title":"Jack Support Foot","description":"\u003cp\u003eShort Jack Support Foot with Retaining Pin fits round tube jacks with 2 inch O.D. inner tubes.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits 2 inch jack tube\u003c\/li\u003e\n\u003cli\u003eZinc plated finish\u003c\/li\u003e\n\u003cli\u003eIncludes retaining pin\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150169137335,"sku":"140070","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/9f950641-05e6-4335-b351-d9f4905b74df.jpg?v=1758672511"},{"product_id":"replacement-jack-handle-for-24-or-30-scissor-style-stabilizer-jack","title":"Replacement Jack Handle for 24\" or 30\" Scissor Style Stabilizer Jack","description":"\u003cp\u003eUsed with Stromberg Carlson scissor stabilizer jacks.  Zinc plated finish with black plastic handle.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUsed with JSC-24 and JSC-30 stabilizer jacks\u003c\/li\u003e\n\u003cli\u003eZinc plating resists corrosion\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150169792695,"sku":"JCH-1","price":14.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/b649dade-27cf-4446-83cf-e3faffe46b0d.jpg?v=1758257180"},{"product_id":"stabilizer-scissor-jack-5-000-lb-capacity","title":"Stabilizer Scissor Jack - 5,000 lb. Capacity","description":"\u003cp\u003eWhen you are camping it is nice to stabilize your RV to eliminate rocking and sway, and to level it. RV's that are not leveled correctly can experience problems with their appliances or systems in their coach. Our scissor jacks are the industries choice by manufacturers to stabilize and level your travel trailer and fifth wheel. Our jack can lift and level 5000 lbs each and our base will support your unit on soft surfaces.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKeeps your RV level and stable\u003c\/li\u003e\n\u003cli\u003eExpands from 4 inch to 24 inch in height\u003c\/li\u003e\n\u003cli\u003eBowtie base sets well on soft surfaces\u003c\/li\u003e\n\u003cli\u003eHolds up to 5,000 lbs. per jack\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150171988151,"sku":"JSC-24","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/80b59a40-955a-469e-aa36-2912c6708ee9.jpg?v=1758450625"},{"product_id":"jack-caster","title":"Jack Caster","description":"\u003cp\u003e6 inch thermoplastic wheel with zinc plated bracket fits round tube jacks with 2 inch O.D. inner tube.  Retaining pin included.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits 2 inch jack tube\u003c\/li\u003e\n\u003cli\u003e6 inch thermoplastic wheel\u003c\/li\u003e\n\u003cli\u003eIncludes retaining pin\u003c\/li\u003e\n\u003cli\u003e2 inch width wheel with a 3\/4 inch bolt\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150173200567,"sku":"140075","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/b6614fc2-dd3c-421b-bf01-da1e6ce6fceb.jpg?v=1758671150"},{"product_id":"stabilizer-scissor-jack-5-000-lbs-capacity","title":"Stabilizer Scissor Jack - 5,000 lbs. Capacity","description":"\u003cp\u003eWhen you are camping it is nice to stabilize your RV to eliminate rocking and sway, and to level it. RV's that are not leveled correctly can experience problems with their appliances or systems in their coach. Our scissor jacks are the industries choice by manufacturers to stabilize and level your travel trailer and fifth wheel. Our jack can lift and level 5000 lbs each and our base will support your unit on soft surfaces.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKeeps your RV level and stable\u003c\/li\u003e\n\u003cli\u003eExpands from 4 inch to 30 inch in height\u003c\/li\u003e\n\u003cli\u003eBowtie base sets well on soft surfaces\u003c\/li\u003e\n\u003cli\u003eHolds up to 5,000 lbs. per jack\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150173528247,"sku":"JSC-30","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/53a38b75-a1e2-4a73-b0d2-ec99dda5388c.jpg?v=1757920883"},{"product_id":"ram-a-frame-top-wind-jack-2-000-lbs-lift-capacity","title":"Ram A-Frame Top Wind Jack, 2,000 lbs. LIft Capacity","description":"This is a Ram Topwind Tongue Jack with a Black powered coat finish. For use with A-Frame trailers.\u003cul\u003e\n\u003cli class=\"data item title active\" tabindex=\"0\" role=\"tab\" data-role=\"collapsible\" data-collapsible=\"true\" aria-controls=\"description\" aria-selected=\"false\" aria-expanded=\"true\"\u003e15\" Travel distance\u003c\/li\u003e\n\u003cli class=\"data item title active\" tabindex=\"0\" role=\"tab\" data-role=\"collapsible\" data-collapsible=\"true\" aria-controls=\"description\" aria-selected=\"false\" aria-expanded=\"true\"\u003e15\" Clearance\u003c\/li\u003e\n\u003cli class=\"data item title active\" tabindex=\"0\" role=\"tab\" data-role=\"collapsible\" data-collapsible=\"true\" aria-controls=\"description\" aria-selected=\"false\" aria-expanded=\"true\"\u003e2,000 lbs. Lift capacity\u003c\/li\u003e\n\u003cli class=\"data item title active\" tabindex=\"0\" role=\"tab\" data-role=\"collapsible\" data-collapsible=\"true\" aria-controls=\"description\" aria-selected=\"false\" aria-expanded=\"true\"\u003e3,000 lbs. Support capacity\u003c\/li\u003e\n\u003cli class=\"data item title active\" tabindex=\"0\" role=\"tab\" data-role=\"collapsible\" data-collapsible=\"true\" aria-controls=\"description\" aria-selected=\"false\" aria-expanded=\"true\"\u003e9.25\" bracket height from bottom of jack to bolt flange\u003c\/li\u003e\n\u003cli class=\"data item title active\" tabindex=\"0\" role=\"tab\" data-role=\"collapsible\" data-collapsible=\"true\" aria-controls=\"description\" aria-selected=\"false\" aria-expanded=\"true\"\u003e24.25\" jack height when fully retracted\u003c\/li\u003e\n\u003cli class=\"data item title active\" tabindex=\"0\" role=\"tab\" data-role=\"collapsible\" data-collapsible=\"true\" aria-controls=\"description\" aria-selected=\"false\" aria-expanded=\"true\"\u003eThere is also a Removable Caster or Foot Plate Available\u003c\/li\u003e\n\u003cli class=\"data item title active\" tabindex=\"0\" role=\"tab\" data-role=\"collapsible\" data-collapsible=\"true\" aria-controls=\"description\" aria-selected=\"false\" aria-expanded=\"true\"\u003eThe High Strength Mounting Bracket Provides Easy Bolt-On or Weld-On Installation \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv id=\"description\" class=\"data item content\" role=\"tabpanel\" aria-labelledby=\"tab-label-description\" data-role=\"content\" aria-hidden=\"false\"\u003e\u003cdiv class=\"product attribute description\"\u003e\u003cdiv class=\"value\"\u003e\n\u003ch4\u003eNot Included:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFoot:\u003cul\u003e\n\u003cli\u003eJF-100-B Black Finish\u003c\/li\u003e\n\u003cli\u003eJF-100-Z Zinc Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eJack Caster:\u003cul\u003e\n\u003cli\u003eJC-101 POLLY CASTER \u003c\/li\u003e\n\u003cli\u003eJC-102 STEEL CASTER\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eJack Mounting Bolt Kit- \u003cu\u003eJBK-38\u003c\/u\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150173561015,"sku":"TJA-2002-B","price":37.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/b0ab4755-12de-45c0-bea3-f3438427f55f.jpg?v=1757920887"},{"product_id":"suspension-pro-electric-tongue-jack-1","title":"Suspension Pro Electric Tongue Jack","description":"\u003cp\u003eThe suspension pro electric tongue jack has weather-protected switches to let you operate 3 multi-bulb work lights and jack independently. Jack features a 2\" jack diameter, a zinc plated leg with a 5-1\/2\" foot pad.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e18\" Travel\u003c\/li\u003e\n\u003cli\u003e22\" Clearance\u003c\/li\u003e\n\u003cli\u003e3,000lb Capacity\u003c\/li\u003e\n\u003cli\u003ePowder Coat Finish\u003c\/li\u003e\n\u003cli\u003e19 amp Draw at Full Load\u003c\/li\u003e\n\u003cli\u003eInternal Thermal Protection\u003c\/li\u003e\n\u003cli\u003e3\/4\" High Strength Self-Lubricating Drive Nut\u003c\/li\u003e\n\u003cli\u003e12V operation with a Resettable Circuit Breaker\u003c\/li\u003e\n\u003cli\u003eHardened Steel Gears with Stainless Steel Fasteners\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150173954231,"sku":"81200","price":393.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/20ed724a-5417-4a81-93bb-4374121e1ce2.jpg?v=1757920889"},{"product_id":"stillwell-hydraulic-hose-fitting-6400-06-06-6-jic-male-x-6-orb-male-sae-070120-straight-fitting","title":"Stillwell Hydraulic Hose Fitting - 6400-06-06, #6 JIC Male X #6 ORB Male (SAE 070120) - Straight Fitting","description":"\u003cp\u003eStillwell Hydraulic Hose Fitting - 6400-06-06, #6 JIC Male X #6 ORB Male (SAE 070120) - Straight Fitting\u003c\/p\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150174380215,"sku":"9012-0606","price":1.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/58da7457-29a2-4e6a-be91-eebdbcfc52ad.jpg?v=1758021327"},{"product_id":"stillwell-hydraulic-hose-60-long-3-8-6-fj-swivel-6-fj-swivel","title":"RIGH_06S0600","description":"\u003cp\u003eStillwell Hydraulic Hose - 60\" Long, 3\/8\", #6 FJ Swivel, #6 FJ Swivel\u003c\/p\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150174412983,"sku":"06S0600","price":21.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/721c6b21-124d-4c63-a34b-788d8e9f87f1_9743b285-ac4b-4220-8674-5f07cda7117e.jpg?v=1782211721"},{"product_id":"tradesman-hydraulic-jack-for-a-frame-trailers-7k-made-in-usa","title":"Tradesman Hydraulic Jack for A-Frame Trailers, 7K - Made in USA","description":"\u003cp\u003eStillwell Jacks' Trademan is a precision jack created for bumper hitch trailer applications. It is a rugged with center mounted hydraulic ports for easy installation. Proudly made in the USA.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBolt on ready\u003c\/li\u003e\n\u003cli\u003eCenter mounted hydraulic ports for easy installation\u003c\/li\u003e\n\u003cli\u003eDesigned to accept all pump manufacturers up to 3200 psi\u003c\/li\u003e\n\u003cli\u003eRemovable foot\u003c\/li\u003e\n\u003cli\u003ePainted body\u003c\/li\u003e\n\u003cli\u003e24″ of travel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150174740663,"sku":"SJ3B1DE","price":247.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/ead51231-ffc7-4553-84cb-27eda29d3558_ca4afa18-e814-4a9b-9d7f-991b33151de1.jpg?v=1775356029"},{"product_id":"stillwell-hydraulic-hose-17-long-3-8-6-fj-swivel-6-fj-swivel","title":"Stillwell Hydraulic Hose - 17\"  Long, 3\/8\", #6 FJ Swivel, #6 FJ Swivel","description":"\u003cp\u003eStillwell Hydraulic Hose - 17\" L,ong, 3\/8\", #6 FJ Swivel, #6 FJ Swivel\u003c\/p\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150174707895,"sku":"06S0170","price":13.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/f91128f0-4598-4f7a-a4e9-7eb251ba5593_f669b72a-3c09-4ec8-bd73-69e9bb052ec1.jpg?v=1779411188"},{"product_id":"dump-trailer-conversion-kit-for-single-10k-atlas-hydraulic-trailer-jack-60-inch-hoses","title":"Dump Trailer Conversion Kit for Single 10K Atlas Hydraulic Trailer Jack - 60 Inch Hoses","description":"\u003cp\u003eThe Single 10K Dump Trailer Conversion Kit (60″) allows you to connect your existing hydraulic dump trailer circuit to a single 10,ooo pound Atlas Hydraulic Jack. This kit includes all of the necessary manifolds, hoses, and adapters.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eKit Includes:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 x 6-Port Ball Valve\u003c\/li\u003e\n\u003cli\u003e2 x 6400-06-06 adapters (straight)\u003c\/li\u003e\n\u003cli\u003e6 x 6801-06-06 adapters (90°)\u003c\/li\u003e\n\u003cli\u003e2 x 22″ neXflex hydraulic hose\u003c\/li\u003e\n\u003cli\u003e2 x 60″ neXflex hydraulic hose\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cem\u003eAtlas Jack Not Included\u003c\/em\u003e\u003c\/p\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150174937271,"sku":"9001-0065","price":213.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/b5ca79c4-28af-4440-908c-1ba4349a9fb3.jpg?v=1775356028"},{"product_id":"stillwell-hydraulic-hose-fitting-6801-06-09-90-degree-elbow-6-jic-mx-6-orb-m","title":"Stillwell Hydraulic Hose Fitting - 6801-06-09, 90 Degree Elbow, #6 JIC MX #6 ORB M","description":"\u003cp\u003eStillwell Hydraulic Hose Fitting - 6801-06-09, 90 Degree Elbow, #6 JIC MX #6 ORB M\u003c\/p\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150175199415,"sku":"9009-0606","price":3.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/f5bdc8e9-7016-481e-a4ab-ea4479461060_0bdc6767-0c58-4015-890f-422f21fce358.jpg?v=1779067499"},{"product_id":"stillwell-hydraulic-hose-12-long-3-8-6-fj-swivel-6-fj-swivel","title":"Stillwell Hydraulic Hose, 12\" Long, 3\/8\", #6 FJ Swivel #6 FJ Swivel","description":"\u003cp\u003eStillwell Hydraulic Hose, 12\" Long, 3\/8\", #6 FJ Swivel #6 FJ Swivel\u003c\/p\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150175363255,"sku":"06S0120","price":12.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/1f870fe1-4b9e-467b-8771-3d6e9e4d21e2_64574eec-6efc-47cc-9882-cc4eb4c11ac7.jpg?v=1779411188"},{"product_id":"bumper-pull-dump-trailer-conversion-kit-for-tradesman-7k-trailer-jack-17-inch","title":"Bumper Pull Dump Trailer Conversion Kit for Tradesman 7K Trailer Jack - 17 Inch","description":"\u003cp\u003eThe Bumper Pull 7K Dump Trailer Conversion Kit (17″) allows you to connect your existing hydraulic dump trailer circuit to a single 7,000 pound Tradesman Hydraulic Jack. This kit includes all of the necessary manifolds, hoses, and adapters.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eKit includes:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 x 6-Port Ball Valve\u003c\/li\u003e\n\u003cli\u003e4 x 6400-06-06 adapters (straight)\u003c\/li\u003e\n\u003cli\u003e4 x 6801-06-06 adapters (90°)\u003c\/li\u003e\n\u003cli\u003e1 x 12″ neXflex hydraulic hose\u003c\/li\u003e\n\u003cli\u003e3 x 17″ neXflex hydraulic hose\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150175592631,"sku":"9001-0049","price":213.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/39f7be83-660b-465c-b6f3-28e34053441f.jpg?v=1775355968"},{"product_id":"wallace-forge-heavy-duty-square-mount-jack-12-000-lb-sidewind-side-pull","title":"Wallace Forge Heavy Duty Square Mount Jack, 12,000 lb., Sidewind, Side Pull","description":"\u003cp\u003eBlack powder coated to reduce corrosion\u003c\/p\u003e\u003cp\u003eAdditional drop leg is 5 position adjustable and up to 15\" of additional drop\u003c\/p\u003e\u003cp\u003eHeat treated inner gears insure increased strength and durability\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e15\" of travel\u003c\/p\u003e\u003cp\u003e25\" retracted\u003c\/p\u003e\u003cp\u003e52\" extended\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150176182455,"sku":"335037","price":230.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/c1f95273-983d-4bca-90b7-2bfadc98beb5.jpg?v=1757920919"},{"product_id":"single-dump-trailer-conversion-kit-for-stillwell-10k-atlas-hydraulic-trailer-jack-39-inch-hoses","title":"Single Dump Trailer Conversion Kit for Stillwell 10K Atlas Hydraulic Trailer Jack  - 39 Inch Hoses","description":"\u003cp\u003eStillwell Atlas Single Dump Trailer Conversion Kit - 39 Inch\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe Single Dump Trailer Conversion Kit (39″) allows you to connect your existing hydraulic dump trailer circuit to a single 10,000 pound Atlas Hydraulic Jack. This kit includes all of the necessary manifolds, hoses, and adapters.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 x 6-Port Ball Valve\u003c\/li\u003e\n\u003cli\u003e2 x 6400-06-06 adapters (straight)\u003c\/li\u003e\n\u003cli\u003e6 x 6801-06-06 adapters (90°)\u003c\/li\u003e\n\u003cli\u003e1 x 12″ neXflex hydraulic hose\u003c\/li\u003e\n\u003cli\u003e1 x 17″ neXflex hydraulic hose\u003c\/li\u003e\n\u003cli\u003e2 x 39″ neXflex hydraulic hose\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cem\u003eAtlas Jack is not incluced.\u003c\/em\u003e\u003c\/p\u003e","brand":"Rigid Hitch","offers":[{"title":"Default Title","offer_id":45150176280759,"sku":"9001-0056","price":213.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/files\/87af52dd-7bfc-4ecf-80d5-4f6d48c6fe32_7828f900-5e5e-405d-886e-9e7217ed1b09.jpg?v=1775356170"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5093\/0359\/collections\/de2abe3f-3444-455b-9293-1aebda654539.jpg?v=1780011584","url":"https:\/\/www.rvtraderaccessories.com\/collections\/jacks-leveling-chocks-rv.oembed?page=5","provider":"RV Trader Accessories Store","version":"1.0","type":"link"}