Cross ribbed, high impact plastic wheel chocks. Use on travel trailers, boat trailers, utility trailers. Bright orange color for high visibility. Dimensions: 7-1/4 inches long x 5 inches wide x ...
<p>A Pole Tongue Adapter is used as a mounting platform for the hook-up brackets of a weight distributing hitch system when a trailer has a pole or straight tongue rather than an A-frame tong...
Wheel Bearing (used with L-11910 bearing race). 3/4" I.D.
High radial and axial load carrying capacity
Accommodate axial loads in one direction
Low friction and long service life
Designed for use on trucks, buses, trailers and other industrial applications. Made of standard malleable iron with a galvanized finish. 2-1/8 inch x 4-3/8 inch step pad has crosshatch pattern to...
This 12 inch steel door hinge features a narrow bracket and is designed to bridge the door molding or door seal. It also features a narrow bracket for mounting where space is limited. 1/2 inch di...
This hub/drum assembly contains everything you need to replace your hub/drum & brake on the drivers side of your trailer. This assembly works for a spindle that has a 1-3/8" inner bearing surfa...
Most hitches on the market use 50 year old technology with clunky steel cams or friction sway controls that correct sway AFTER it begins. SwayPro's built-in optimized sway prevention uses the geome...
<p>The new 12k Equal-i-zer hitch is perfect for RVers with medium to heavy-duty weight trailer applications that still want the premium performance of an original Equal-i-zer 4-point sway con...
Adjustable shank that can only be used with Equal-i-zer brand weight distribution kits. Works with kit numbers 90-00-0600 (600 lb), 90-00-1000 (1000 lb), 90-00-1200 (1,200 lb) or 90-00-1400 (1,400 ...
Rubber keel roller is a direct replacement for the original equipment on many trailers. Fits standard brackets with 5/8 inch shaft size.
Fits keel properly to support heavier boats
Accepts 5/8 inch...
Pair of galvanized metal brackets and hardware for mounting Peterson 440 or other popular tail lights to post-style PVC guide-ons. 2 inch hole spacing for light mounting with relief for wiring. L...
The fastest, easiest way to chock your trailer wheels. No more bending or kneeling! Just hold the cable handle, slide it between the tires & step down on the arms! Adjusts To Fit 16" to 24" sp...
Trailer door hinge with reverse bracket allows door to swing 270 degrees. Hinge has 1/2 inch non-removeable pin. Bracket measures 4-1/2 inch x 1-5/8 inch. Strap measures 2 inch x 12 inch. Made of 8...
Designed for use on trucks, buses, trailers and other industrial applications. Made of die cast zinc, chrome plated. 7" x 6-3/4" step pad has crosshatch pattern to prevent slipping. Stainless steel...
Heavy duty aluminum trailer door hold back with 2 inch hook. Includes keeper with spring loaded latch mechanism for positive engagement.
Heavy duty die-cast aluminum construction
Two piece holdbac...
Trailer SumoSprings Contact Plate for Trailers with Springs not Directly Under Frame Rail. One Kit Needed Per Axle. For GAWR: 5000-8500 (Spring-Over Axle Configuration)
If your Travel Trailers has ...
The Power Stance comes standard with an integrated safety chain storage ring. This means no more dragging chains across the ground. All you have to do is clip or hang your chains on the ring, and t...
The Sway Control is used to reduce trailer sway and improve handling in adverse towing conditions. Sway control units dampen trailer sway caused by crosswinds and traffic. Both friction and dual ca...
For the best and safest towing experience, you need the e2â„¢ hitch, providing you with faster and easier weight distribution and sway control.Old chain-style hitches do not provide built-in sway c...
Adjustable Shank can only be used with Round Bar or Trunnion Bar weight distributing hitches. Works with all Draw-Tite, Reese and Pro Series trunnion or round bar style weight distributing hitches...
Adjustable Shank can only be used with Round Bar or Trunnion Bar weight distributing hitches. Works with all Draw-Tite, Reese and Pro Series trunnion or round bar style weight distributing hitches...
