This hub/drum assembly contains everything you need to replace your hub/drums & brakes on your trailer. This assembly works for a spindle that has a 1-3/8" inner bearing surface to a 1-1/16" be...
This Dexter Model 20 Surge Brake Actuator (formerly Dico / Titan) is equipped with a 2-5/16" coupler with 3" drop. Unit is designed to work with drum brakes and must be bolted onto a 3" wide traile...
Introducing the new Dexter DX8.5 Disc Brake Actuator. (Formerly Tie Down Engineering 850E) Equipped with the new "Drop N Go" latch mechanism. The quick lock mechanism will automatically lock when l...
This round trailer axle spindle is made from solid steel and carries a 1,350 pound rating. The bearing surfaces are 1-1/16 inch diameter and the mounting surface is 1-5/8 inch diameter. A 4-bolt br...
This hub/drum assembly contains everything you need to replace your hub/drum & brake on the passenger side of your trailer. This assembly works for a spindle that has a 1-3/8" inner bearing sur...
<p>This hub/drum assembly contains everything you need to replace your hub/drum & brake on the drivers side of your trailer. This assembly works for a spindle that has a 1-3/4" inner bear...
This hub/drum assembly contains everything you need to replace your hub/drum & brake on the passenger side of your trailer. This assembly works for a spindle that has a 1-3/8" inner bearing sur...
<p>This hub/drum assembly contains everything you need to replace your hub/drum & brake on the passenger side of your trailer. This assembly works for a spindle that has a 1-3/4" inner be...
<p>This hub/drum assembly contains everything you need to replace your hub/drums & brakes on your trailer. This assembly works for a spindle that has a 1-3/4" inner bearing surface to...
7 inch x 1-1/4 inch electric brake assembly fit 2,000 lb. axles with 4-bolt pattern. Includes mounting studs. Dexter number: K23-047-00.
Rated 2,000 lbs. capacity per pair
4-bolt mounting pattern
12 inch x 2 inch electric brake assembly fits 5,200 and 6,000 lb. axles with 5-bolt pattern. Dexter part number: K23-105-00.
Rated 6,000 lbs. capacity per pair
5-bolt mounting pattern
12 inch x 2 inch hydraulic brake assembly fits 5,200 lb. axles with 5-bolt pattern. Dexter number K23-324-00.
Rated 5,200 lbs. capacity per pair
5-bolt mounting pattern
Left hand, driver's sid...
7 inch x 1-1/4 inch electric brake assembly fit 2,000 lb. axles with 4-bolt pattern. Includes mounting studs. Dexter number: K23-048-00.
Rated 2,000 lbs. capacity per pair
4-bolt mounting pattern
Replacement Master Cylinder for Dexter / Titan Model 60 Drum Brake Actuator. Does not include master cylinder cover or cap. Does include rubber boot and internal components. Mounting bolt patter...
This replacement master cylinder is used on Dexter DX8.0 and DX12.5 (formerly Titan model 10 and 20) drum brake actuators. Included are the master cylinder filler cap, push rod and rubber boot. Cyl...
This Dexter Model 60 surge brake actuator (formerly Titan / Dico) is equipped with a lever-lock coupler designed to fit 2" hitch balls. Coupler can be adjusted to fit 1-7/8", or 50mm hitch balls by...
This Dexter Model 10 Disc Brake Actuator (formerly Dico / Titan) is equipped with a 2-5/16" coupler with 3" drop. Unit is designed to work with disc brakes and must be bolted to a 3" wide trailer t...
This replacement master cylinder is used on Dexter / Titan Model 60 drum brake actuators. Included are the master cylinder, cover with gasket, bolts and filler cap, rubber boot and orifice. Titan...
This Dexter Model 10 (formerly Dico / Titan) surge drum brake actuator is equipped with a 2-5/16" coupler with 3" drop. Unit is designed to work with drum brakes and must be bolted to a 3" wide tra...
A proven track record of performance and reliability, designed to be hard wired into your trailer's electrical system. All components self-contained under the BrakeRite cover. BrakeRite has been a ...
A proven track record of performance and reliability, designed to be hard wired into your trailer's electrical system. All components self-contained under the BrakeRite cover. BrakeRite has been a...
Replacement electric trailer brake magnet fits Dexter & Hayes 10 inch x 2-1/4 inch brakes built after mid-1987 thru 1993. Oval shaped magnet with green wire. Includes spring and retaining cli...
7 inch x 1-1/4 inch electric brake assemblies fit 2,000 lb. axles with 4-bolt pattern. Includes mounting studs. Dexter numbers K23-047-00 and K23-048-00.
Rated 2,000 lbs. capacity per pair
4-bolt...
Complete 12-1/4 inch x 3-3/8 inch electric 8K FSA brake assembly. Right Hand. Dexter part number: K23-435-00.
Rated 8,000 lbs. capacity per pair
4-bolt flange mounting pattern
For 15" wheel si...
