Draw-Tite Shank designed for use with all Trunnion and Round Bar Weight Distributing Kits. Works with all Draw-Tite, Reese and Pro Series trunnion or round bar style weight distributing hitches.
D...
Forged from high-strength chromoly steel and designed to fit Original Equal-i-zer brand weight distribution kits. 2 year limited warranty.
Comes with wrench flats
Torque nut to 430 ft-lbs
Most hitches on the market use 50 year old technology with clunky steel cams or friction sway controls that correct sway AFTER it begins. SwayPro's built-in optimized sway prevention uses the geome...
Works with Blue Ox SwayPro weight distribution kits. Fits 2" receivers and has a 10" shank length (measured from the center of the hitch pin hole to the end of material)
Gunmetal Powder Coat Finish...
Most hitches on the market use 50 year old technology with clunky steel cams or friction sway controls that correct sway AFTER it begins. TrackPro is the first weight distribution hitch to use Sway...
<p>Retaining pin kit (2) for holding TrackPro and SwayPro spring bars into the hitch head. 5/16" x 2-1/2" spring lock pin.</p>
<p> </p>
<p>Quantity 2 in kit...
Spring Bar Lift Tool for Blue Ox TrackPro Weight Distribution Hitches
This bar tool is used to lift the Blue weight distribution spring bars onto the trailer frame brackets during installation of ...
Most hitches on the market use 50 year old technology with clunky steel cams or friction sway controls that correct sway AFTER it begins. SwayPro's built-in optimized sway prevention uses the geome...
The 90-00-1600 Equal-i-zer hitch offers a 1,600 lb. maximum tongue weight and a massive 16,000 lb. maximum trailer weight. The shank allows a 3" drop and a 6" rise, measures 12" long, and fits heav...
Immediate and continuous friction sway prevention
Single pivot point eliminates noise and wear points
Preset head angle works for every setup
Setup is all done on the drivers side
Load the ba...
Most hitches on the market use 50 year old technology with clunky steel cams or friction sway controls that correct sway AFTER it begins. TrackPro is the first weight distribution hitch to use Sway...
Blue Ox BXW4041 Kit, Spring Bars, 1,000 LB. TrackPro Weight Distribution - Replacement part or use to change the tongue weight capacity of the weight distribution hitch.
Immediate and continuous friction sway prevention
Single pivot point eliminates noise and wear points
Setup is all done on the driver’s side.
Load the bars by pumping the handle.
Unload the b...
Works with Blue Ox SwayPro weight distribution kits. Fits 2 inch receivers and has a 9 inch shank length (measured from the center of the hitch pin hole to the end of material)
Gunmetal Powder Coat...
For the best and safest towing experience, you need the e2 hitch, providing you with faster and easier weight distribution and sway control.Old chain-style hitches do not provide built-in sway cont...
Forged from high-strength chromoly steel and designed to fit Original Equal-i-zer brand weight distribution kits. 2 year limited warranty.
Comes with wrench flats
Torque nut to 430 ft-lbs
This Type 190 - 135 degree split point drill bit is recommended for use in portable air and electric drilling equipment. Sold as each.
3/8 inch 135 degree split point drill bit
This Type 190 - 135 degree split point drill bit is recommended for use in portable air and electric drilling equipment. Sold as each.1/2 inch 135 degree split point drill bit
