Fits Dexter 12 inch x 2 inch brakes on 6,000 lb. axles. White wire. Includes spring and retaining clip.
Oval shaped maget with white wire
Used on 12 inch x 2 inch Dexter electric brakes
Includes ...
This Dexter / Titan Model 60 surge brake actuator is equipped with a lever-lock coupler to fit 2" hitch balls. Coupler can be adjusted to fit 1-7/8", or 50mm hitch balls by tightening the coupler's...
10 inch x 2-1/4 inch electric brake assemblies fit 3,500 lb. axles with 4-bolt pattern on 2-7/8 inch center. Includes mounting studs. REPLACES Alko numbers 363383.1 and 363383.2.
Rated 3,500 lbs. ...
12 inch x 2 inch electric brake assembly fits 6,000 lb. axles with 5-bolt pattern. REPLACES Alko number 363233.1.
Rated 6,000 lbs. capacity per pair
5-bolt mounting pattern
Right hand, passenger si...
12 inch x 2 inch electric brake assembly fits 6,000 lb. axles with 5-bolt pattern. REPLACES Alko number 363233.2.
Rated 6,000 lbs. capacity per pair
5-bolt mounting pattern
Left hand, driver's side...
12 inch x 2 inch hydraulic freebacking trailer plate. Titan Premier's drum brake assembly provides superior protection from corrosion and lets you reverse without actuating. Designed for use with h...
Replacement filler cap and gasket used on Dexter DX12.5 and DX20EX (formerly Titan model 10 and 20) surge brake actuators. Threaded area is 1-9/16 inch diameter. Titan part number: 4830600.Used o...
<div>Coupler Latch Kit Assembly fits Dexter DX6.6, DX7.5 and DX8.5 surge brake actuators with serial number 17927 and above. Formerly Tie Down Engineering models 660E, 750E and 850E...
Fits Dexter 12-1/4 inch x 3-3/8 inch (9-10K), 12-1/4 inch x 4 inch (10K) and 12-1/4 inch x 5 inch (12-15K) electric brakes built after 6/92. Red and black wires. Includes spring and retaining clip....
10 inch x 2-1/4 inch electric brake assembly fits 3,500 lb. axles with 4-bolt pattern on 2-7/8 inch center. Includes mounting studs. Dexter part number: K23-027-00
Rated 3,500 lbs. capacity per pa...
A proven track record of performance and reliability, designed to be hard wired into your trailer's electrical system. All components self-contained under the BrakeRite cover. BrakeRite has been a ...
Fits Dexter 10 inch x 2-1/4 inch brakes and 10 inch x 1 1/2 inch brakes on 3,500 lb. axles. Replaces the oval magnet with the yellow lead wire produced after 9-1-1988. Includes spring and retaini...
Replacement studs for 2,000 and 3,500 lb. hubs with pressed in studs. Knurled area measures 0.438 inch. Grade 8, yellow zinc plated. 10-Pack.10-Pack of Studs
Master Cylinder Cap with internal bladder and O-ring. Fits Dexter DX6.6, DX7.5 and DX8.5 surge brake actuators, both drum and disc brake models. Formerly Tie Down Engineering models 660E, 750E and ...
Arlen Ness Method Blue Fork Brace 20-367NOTES: CNC-machined from forged aluminum.Description:
Forged construction eliminates flex in your fork assembly.
Race inspired design installs without disass...
BikeMaster Brake Pad and Shoe For Honda CBR900RR 1993-1997 Standard FrontNOTES:- BikeMaster Sintered Brake Pads offer increased performance, higher heat resistance and longer life than standard pad...
BikeMaster Brake Pad and Shoe For Yamaha MT-10 2018-2019 Sintered Front FrontNOTES:- BikeMaster Sintered Brake Pads offer increased performance, higher heat resistance and longer life than standard...
BikeMaster Brake Rotor For Yamaha WR250R 2002-2008 Contour RearNOTES:- Manufactured by one of Europe's premier disc brake experts, known for manufacturing braking components for many O.E.M. brands....
