High Lifter Apexx Rear Raked Upper And Lower Black Control Arms For Can-Am Models HDRRA-C1D-B

High Lifter Apexx Rear Raked Upper And Lower Black Control Arms HDRRA-C1D-B

NOTES:

Whether you ride in deep mud or over rocky trails, the need for stronger control arms with added ground clearance is extremely important. Most stock arms are too weak to withstand what you put your bike through and lack the added ground clearance needed for challenging trails. High Lifter has solved your problem by designing tough control arms, twice as strong as your stock arms, with the added ground clearance you need for all terrains and bigger tires.

• Built in Adjustability.
• These lower arms feature an adjustability component in the bushing collars to eliminate premature wearing that can come from the addition of lift kit s, portals, or large tires.
• When the kit is set to the factory position, you will have 3/8 of adjustability camber in and out.
• The Heat-treated and plated adjustable bushing collars allow you to be confident in the strength you're adding to your ride.
• The collars come pre-adjusted to the factory position, and factory bushings and caps should be used for installation.
• Features 50% larger than average stock arms.
• Crafted from 1 1/2 x.
• 120mm wall thickness.
• DOM steel.
• Up to 2.5x the wall thickness of average stock arms.
• Grease fittings included for most models.
• Added ground clearance featuring bends that maximize clearance and axle protection.
• Easy to install and maintain.
• Limited Lifetime Warranty.
• Adjustable heat-treated collars for camber adjustability with a 1" thread.

Brand: High Lifter
Part Number: HDRRA-C1D-B

Fitment:

• 2020-2022 Can-Am Defender HD10 4x4 DPS
• 2020-2022 Can-Am Defender HD10 4x4 XT DPS
• 2020 Can-Am Defender HD10 4x4 XTP
• 2020-2022 Can-Am Defender Max HD10 4x4 DPS
• 2020-2022 Can-Am Defender Max HD10 4x4 XT DPS
• 2020-2022 Can-Am Defender Pro HD10 4x4 DPS

Note: Image is for reference only, actual product may vary slightly.