Caster assembly with 2 x 6 inch poly wheel. Fits 2 inch O.D. jack tube.
Fits 2 inch jack tube
6 inch poly wheel
Includes retaining pin
1,200 lb. capacity
Fits Dexter 12 inch x 2 inch brakes on 6,000 lb. axles. White wire. Includes spring and retaining clip.
Oval shaped maget with white wire
Used on 12 inch x 2 inch Dexter electric brakes
Includes ...
Topwind Pipe Mount Swivel Jack
10" Travel
11" bracket height from bottom of jack to center of swivel mount
17" jack height when fully retracted
5,000 lb. Support Capacity
3,000 lb. Lift Cap...
This hub/drum assembly contains everything you need to replace your hub/drum & brake on the passenger side of your trailer. This assembly works for a spindle that has a 1-3/8" inner bearing sur...
Hub has 5 on 4-1/2" bolt circle for a 2,000lb axle with a hub capacity of 1,250lbs. Includes pressed in bearing races with a pilot diameter 2.5", flange diameter 5.56" and is 4-1/4" tall.
This kit...
This square bar trailer axle spindle carries a 1,750 pound rating. The inner bearing surface is 1.376 inch diameter, the outer bearing surface is 1.062 inch diameter and the mounting surface is 1....
Spring shackle links are used for attaching the rear of double eye springs to hanger brackets on single axle trailers. Link has 9/16" holes with 2.56" hole centers.
Overall lingth 3.81"
Trailer axle spring U-bolt used with 3,500 lb. trailer axles with a 2-3/8 inch tube diameter.
See second picture for U-bolt dimensions
Length: 5.50 inch I.D.
Width: 2.44 inch I.D.
Thread: 1/2...
<p>10 inch x 2-1/4 inch electric brake assembly fits 3,500 lb. axles with 4-bolt pattern on 2-7/8 inch center. Includes mounting studs. REPLACES Alko number 363383.1.</p><ul><...
Bearing Buddy Bearing Protectors provide protection against damage from water and dirt entering the wheel bearings and make lubricating bearings a snap. Also comes with a pair of Bearing buddy bras...
For use with trailers with A-frame couplers
14 inch travel. 20" retracted, 34" extended
3,000lb Support Capacity / 2,000lb Lift Capacity
2-1/4" outer tube diameter, 2" inner tube diameter
...
Designed to secure side doors on enclosed trailers, this lock assembly allows entire 48 inch length of 3/4 inch pipe to cam over and secure the door. Includes 2 hinge assemblies, bracket with hasp...
Locknut is used with most models of spring U-bolts for attaching springs and tie plates to trailer axles.
Thread: 1/2"-20
U-bolts and tie plates sold separately
This Dexter Model 60 surge brake actuator (formerly Titan / Dico) is equipped with a hand-wheel coupler to fit 1-7/8", 2" or 50mm hitch balls. Unit is designed to work with drum brakes and bolts to...
Fits Dexter DX8.0 and DX12.5 (formerly Titan model 6, 10 and 16) brake actuators. Titan part number 1242600
Overall Length - 8-1/4 inch / Collapsed - 6 inch
Outside diameter of tube - 1-5/8 inc...
12 inch x 2 inch hydraulic freebacking trailer plate. Titan Premier's drum brake assembly provides superior protection from corrosion and lets you reverse without actuating. Designed for use with h...
Spring shackle links are used for attaching the rear of double eye springs to hanger brackets on single axle trailers. Link has 9/16 inch holes with 2 inch hole centers. 10-Pack.
10-Pack
The immobilizer eliminates or greatly reduces rattling and movement in the receiver hitch.
• Keeps hitch-mounted accessories stable and secure
• Eliminates rattle and sway within your hitch r...
