Heavy duty cam-action door lock fit flush mount to 3/4 inch offset doors. All steel 14-1/2 inch x 1-1/2 inch handle and hasp allows the builder to weld handle lug to pipe (not included). Handle i...
Introducing the new Dexter DX8.5 Disc Brake Actuator. (Formerly Tie Down Engineering 850E) Equipped with the new "Drop N Go" latch mechanism. The quick lock mechanism will automatically lock when l...
Cast steel ball clamp is stronger than stamped steel
Equipped with a cast steel latch - lays flatter for improved looks
Large capacity aluminum master cylinder requires less refilling
Large fi...
Spring hanger kit for mounting double eye springs to triple axle trailers. Kit includes (4) EQ-103 equalizers, (8) hanger brackets, (16) spring shackle links, (24) spring bolts and lock nuts.
Equa...
Rubber spool roller is a direct replacement for the original equipment on many trailers. Fits standard brackets with 5/8 inch shaft size.
Made for keel support on lighter boats
Accepts 5/8 inch sha...
This heavy duty hanger kit is for mounting 2" wide slipper springs on a tandem axle trailer. The kit includes 6 hanger brackets, 8 spring bolts with lock nuts and 2 equalizers with bolts and nuts. ...
Easily build your own axle with this 2,000 lb. rated assembly. This kit includes (2) - 5-bolt on 4-1/2 inch bolt center hubs for 2,000 lb. axles, (2) - 1 inch straight spindles, (2) castle nuts, (2...
Push to Test LED's indicate fully charged, charging or recharge
Multi-Stage Integrated Charger provides a fast recharge up to 12.8 volts. Once battery is fully charged the automatic float mode i...
Spring hanger kit for mounting double eye springs to tandem axle trailers. Kit includes (2) EQ-103 equalizers, (6) hanger brackets, (8) spring shackle links, (14) spring bolts and lock nuts.
Equal...
Used primarily as a rear hanger bracket for double eye leaf springs on single axle trailers, this spring bracket measures 1-1/2" long by 2-1/4" tall with a 9/16" hole. Inside width is 1.30". Bracke...
Trailer Leaf Springs come in a variety of lengths, widths, capacities and styles. Free Length is the distance from the center of each mounting hole on a double eye spring, or from the mounting hole...
Carpeted bunkboards provide proper center loading even in wind or side current conditions. 2 inch x 4 inch X 5 foot boards tilt to hug the hull and are covered with high grade marine carpet. Distan...
Zinc plated steel roller shaft and two cap nuts. Replaces original equipment on most trailers.
Zinc plated to resist corrosion
Includes cap nuts
Can be cut to length
These waterproof, shockproof LED post guide lamps make it easy to see your trailers position when backing down the boat launch and dramatically increase your trailers visibility over the road at ni...
Easily build your own axle with this 2,200 lb. rated assembly. This kit includes (2) - 5-bolt on 4-1/2 inch bolt center hubs for 2,200 lb. axles, (2) - 1-1/16 inch straight spindles, (2) cast...
<p>Perfect item to build your own custom motorcycle trailer!<br><br>Torsional stub axles use specially formulated "rubber" cords to cushion the turning of the inner bar to create ...
Completely sealed breakaway switch to automatically set trailer brakes in case of accidental trailer breakaway. 48 inch cable and leads. 10-Pack.10-Pack of breakaway switches with pins and cables
This hub/drum assembly contains everything you need to replace your hub/drums & brakes on your trailer. This assembly works for a spindle that has a 1-3/8" inner bearing surface to a 1-1/16" be...
Self-adjusting backing plate eliminates the need for periodic maintenance of brake adjusters. The fine-tooth adjuster mechanism keeps the brake shoes at the optimum position as normal wear occurs. ...
Surfaced mounted trailer door hold back plunger holds trailer door securely in open position. The plunger fits firmly and quietly into the socket (sold separately). Mounting holes for 1/4 inch sc...
