Bearing Buddy Bearing Protectors provide protection against damage from water and dirt entering the wheel bearings and make lubricating bearings a snap.
Please see measurement instructions (seco...
Hub has 5 on 5" bolt circle for a 1-3/8" To 1-1/16" tappered spindle for 3,500lb axle with a hub capacity of 1,750lbs. Includes pressed in bearing races with a pilot diameter 2.59 inches, flange d...
Kit Includes - (4) U-Bolts, (2) Tie Plates (2) Spring (SS-300) seats and (8) Nylon Lock Nuts. U-Bolt Measurements - 7 Inch Length, 3.09 Inch Inside Width, 1/2-20 Thread. Tie Plate Measurements - 5....
Kit Includes - (4) U-Bolts, (2) Tie Plates and (8) Nylon Lock Nuts. U-Bolt Measurements - 5 Inch Length, 2.94 Inch Width, 1/2-20 Thread. Tie Plate Measurements - 5.92 Inch Length, 3.75 Inch Width, ...
Used primarily as a front hanger bracket for double eye or slipper style leaf springs, this spring bracket measures 3" long by 2" tall with a 9/16" hole located 1.44" from the top of the bracket. I...
Bearing Buddy Bearing Protectors provide protection against damage from water and dirt entering the wheel bearings and make lubricating bearings a snap.
Please see measurement instructions (seco...
12" Hub and Drum has 8 on 6-1/2" bolt circle for 1-3/4" To 1-1/4" tapered spindle for a 5,200lb to 6,000lb axle
3,500 lb. capacity hub
Includes pressed in outer bearing races
2-1/2" deep ins...
This round bar, tapered trailer axle spindle is made from solid steel and carries a 1,750 pound rating. The inner bearing surface is 1.376 inch diameter and the outer bearing surface is 1.061 inch ...
This U-bolt tie plate is made to be used with 2-3/8 inch diameter axles rated up to 3,500 lbs. Holes are 9/16 inch on 2-15/16 inch hole centers. Plate is 5-15/16 inch x 3-3/4 inch.
Length: 5.92 ...
This square bar trailer axle spindle carries a 1,250 pound rating. The bearing surfaces are 1-1/16 inch diameter and the mounting surface is 1-1/2 inch square. Includes nut and cotter pin.Please no...
Spring hanger kit for mounting 1-3/4" wide double eye springs to a single axle trailer. Kit includes (2) front hanger brackets (HG-101), (2) rear hanger brackets (HG-100), (4) spring shackle links...
Bearing Buddy Bearing Protectors provide protection against damage from water and dirt entering the wheel bearings and make lubricating bearings a snap.
Please see measurement instructions (seco...
Wheel Bearing (used with L-11910 bearing race). 3/4" I.D.
High radial and axial load carrying capacity
Accommodate axial loads in one direction
Low friction and long service life
Bearing Buddy Bearing Protectors provide protection against damage from water and dirt entering the wheel bearings and make lubricating bearings a snap. Also includes a pair of bras.
Please see ...
This round trailer axle spindle is made from solid steel and carries a 1,000 pound rating. The bearing surfaces are 1" diameter and the mounting surface is 1-1/4 inch diameter. Includes nut, washer...
Trailer Leaf Springs come in a variety of lengths, widths, capacities and styles. Free Length is the distance from the center of each mounting hole on a double eye spring, or from the mounting hole...
Spring bolt for mounting double eye or slipper style axle springs to hanger brackets or equalizers. 9/16" x 3". Knurled shoulder prevents bolt from spinning in hanger bracket.
Trailer axle spring U-bolt used with 3,500 lb. trailer axles with a 2-3/8 inch tube diameter.
See second picture for U-bolt dimensions
Length: 5.50 inch I.D.
Width: 2.44 inch I.D.
Thread: 1/2...
