Connect IMSA configured communication wiring to wired Stilo helmets. Simply connect the white plug into your Stilo helmet comms jack, and the black plug into an IMSA style harness and you're ready ...
Having noise interference issues with your intercom? Connect this intercom Audio Filter to your intercom to reduce noise generated through the charging system/power supply.
Alternating current fluc...
Not running an intercom? Simply block off the intercom area in the Rugged Multi Mount with the convenient intercom block off plate. The perfect solution when only running a intercom in a SXS, UTV o...
Talk on your iPhone with the Rugged Radio 5-Pin cell phone cable.
This 5-Pin connection is configured for use with 5-pin headsets.
Features:
Locking connector
Gold plated plug
4' foot straight cab...
With this Headset Sizing Kit, you can adjust your adult 'Over the Head' headset to fit your child's head.
Includes a small sized polished stainless steel headband and small foam ear seals.
Your kid...
Replacement leather ear seals for AlphaBass Headset.These serve as a replacement to the original luxurious ear seals for your AlphaBass Headset. Rugged leather ear seals conform better than both ge...
Keep debris out of your MAC-XC with this specially developed plug! During single-rider use, it diverts air pressure to one side for increased flow.
Features:
Hold-tight press fit design
Easy to ...
Compatible with several Midland Handheld Radios. Complete your communications with this hand held radio jumper. Connect your 2-way radio to your wiring harness, intercom, or cabling setup.
Specially developed with a built-in 10K resistor, this cable reduces audio volume from your mobile radio to your intercom system.
Allows better volume control of your incoming radio transmission in...
NASCAR driver communication kit connects to your existing Mot. 2-pin radio. Includes 2 pin radio jumper (compatible with Motorola handheld radios), and mono AlphaBud foam ear bud speakers. (radio n...
Adapt your NASCAR helmet kit to a IMSA car harness.
Note: NASCAR helmet kits are common grounded and may not work with all radios. If you are not sure please call.
The NMO Stick-On features a high quality antenna coaxial cable with a 3M VHB double sided tape mount, and is easily convertible to become two mounts in one!! Mounting Option 1: Adhesive BaseConveni...
Easily add serviceability to your communications system! This DMU Nut Plate provides threaded inserts needed to mount your radio and intercom to any flat dash using our Multi Mount Insert. Simply c...
>> Pre-labeled driver and co-driver intercom cables make cable identification quick and easy to your intercom and listening device.
>> Connect your OFFROAD wired helmet kit or Ultim...
Connect your R1, GMR2, V3, RH-5R, RDH16 or Kenwood 2-Pin radio to an OFFROAD helmet kit or headset with this coil cord.
Plug the 2-pin connector into your radio and the OFFROAD connector into your ...
3' straight extension cord for OFFROAD helmet kits.
Works with all Rugged, PCI Race Radios, Avcomm, RacerX, and other OFFROAD intercoms.
Total Shield RF blocking
Nexus Jack OFFROAD plug
High bend ...
Use this adapter for running headsets while trail riding in a vehicle using OFFROAD intercom cables.
Connects your headset with standard 5-pin connector to female jack of intercom cable. Approximat...
Connect OFFROAD configured intercom cable to Rugged OFFROAD 5-pin components with this simple adapter. With this simple adapter, you can run a headset or a wired helmet in the same vehicle.
Plug in...
Make your intercom and mobile radio a fast easy install in the Polaris RZR mount. Simply bolts to the factory holes under the dash. Fits all RZR 570's, 800's and XP900's up to 2014 including the 20...
Built with the Polaris Xpedition in mind, this kit combines two rocker style push-to-talk buttons with 3 foot extension cables.
This combination allows the placement of your PTT's for both driver a...
The Rugged G1 GMRS mobile radio kit.
Engineered to race, built for adventure.
Designed from the ground up in Arroyo Grande California, the G1 is IP67 waterproof, and it's all-aluminum chassis pr...
Connect your M1 Professional RACE Series mobile radio to a headset or intercom with 6 pin connector!
This cable threads securely to the rear panel of the M1 mobile radio and then into the back of y...
Quickly add a rocker switch panel to your OBS Ford dash! Simply use the bezel as your cutting template, drill holes for your mounting screws, and you're in business.
Compatibility: Universally fi...
The BAT-RDHX battery is specifically designed for the popular Rugged Radios RDH-X and ABH7 handheld radios.The lithium-ion rechargeable battery is identical to the battery that comes with your RDH-...
