Adjustable Axle Kit for building 2,000 lb. axles up to 84 inches wide to hub faces and 70 inches wide at spring centers. Axle kit is shipped as separate pieces and includes the axle tube, 1 inch straight spindles, spring seats, 4-bolt hubs (on 4 inch bolt circle), lug nuts, bearings, seals, spindle nuts, cotter pins, dust caps, springs, tie plates and lock nuts. Full fabrication, cutting and welding is required to complete the axle.
- For building axles up to 84 inch hub face and 70 inch spring centers
- Full fabrication is required
PLEASE NOTE: Fabricating an axle requires the proper equipment needed to apply a weld. If you are uncomfortable with your welding capabilities, this project should be handled by a qualified welder.
